Scotchkot
4Pages

{{requestButtons}}

Catalog excerpts

Scotchkot - 1

Fusion Bonded Epoxy Coating 206N Designed for your specific corrosion protection needs Scotchkote 3M Fusion Bonded Epoxy Coating Used on These Products: McCrometer, Inc. 3255 W. Stetson Avenue, Hemet, CA 92545 Phone:(951)652-6811 Fax:(951)652-3078 Web Site: http://www.mccrometer.com Hours: 8 A.M. - 4 P.M. PST, Monday-Friday

Open the catalog to page 1
Scotchkot - 2

PRODUCT DESCRIPTION “Scotchkote” Brand 206N Fusion Bonded Epoxy Coating is a one-part, heat curable, thermo-setting powdered epoxy coating designed to provide maximum corrosion protection under widely varying operating conditions for both interior and exterior of pipe. The epoxy is applied to preheated steel as a dry powder which melts and cures to form a continuous, insulative corrosion barrier. This bonding process provides excellent adhesion and coverage on pipe, fittings, valves, couplers pumps and other equipment. Scotchkote 206N coating is resistant to corrosive soils, hydrocarbons,...

Open the catalog to page 2
Scotchkot - 3

TO THE SPECIFYING ENGINEER: HOW TO SPECIFY SCOTCHKOTE COATING TO THE ENGINEER: Outlined here is an example of a typical coating specification used to employ a Scotchkote Fusion Bonded Epoxy Coating on an item such as a water fitting for asbestos-cement pipe. COATING SPECIFICATIONFUSION BONDED EPOXY COATING FIELD WELDS AND FIELD DAMAGE REPAIR MATERIAL: The lining and coating material shall be of 100% solids, thermosetting fusion bonded, dry powder epoxy coating such as Scotchkote 206N (3M Company) or approved equal and shall be NSF approved for potable water. APPLICATION: The epoxy powder...

Open the catalog to page 3
Scotchkot - 4

TEST DATA - COATING PROPERTY TEST DESCRIPTION ABRASION RESISTANCE ASTM D 1044, CS-17 wheel 1000 g weigh, 5000 cycles CATHODIC DISBONDMENT 90 day, 1.5 volts 3% ASTM G 8 salt solution Disbondment diameter 24 mm average COMPRESSIVE STRENGTH ASTM D 659 11600 psi (819 kg/cm2) ELECTRIC STRENGTH ASTM D 1000 1150 volts/mil - 45 kv/mm ELONGATION HOT WATER RESISTANCE 212°F (100°C) immersion 1000 hours surface roughening and softening IMPACT Gardner 5/8” (1,6 cm) diameter tup 1/8” x 3” x 3” (0,32 cm x 7,6 cm x 7,6 cm) steel panel No blistering, good adhesion, slight discoloration, MOISTURE VAPOR...

Open the catalog to page 4

All McCrometer catalogs and technical brochures

  1. FPI Mag

    4 Pages

  2. Level Sensor

    2 Pages

  3. WHITE PAPER

    5 Pages

  4. Ultra Mag

    4 Pages

  5. Wafer-Cone

    4 Pages

  6. V2

    4 Pages

  7. V-Cone

    6 Pages

Archived catalogs