Specification Sheet McCrometer CONNECT Irrigation Gauge Irrigation Gauge McCrometer CONNECT offers an irrigation gauge compatible with the A723, A733 and A753 field monitoring stations. The unit is ideal for monitoring efficiency of drip irrigation systems, and will withstand harsh environmental conditions. This sensor measures precipitation and irrigation by means of a self-emptying spoon, which tips when the preset water weight has been reached. The sensor maintains it’s accuracy over many years and can be easily recalibrated. The irrigation gauge comes complete with a pole mounting bracket, two pipe clamps, and a shielded 5m cable with a 7-pin Binder jack. Specifications Resolution Measuring Device Tipping Spoon Capacity / Minute Operating Temperature Ordering Information 201.733.002 - Irrigation Gauge 1mm, 50cm² orifice, 5m cable , mast mounting 3255 WEST STETSON AVENUE • HEMET, CALIFORNIA 92545 USA www.mccrometer.com TEL: 951-652-6811 • 800-220-2279 • FAX: 951-652-3078 Printed In The U.S.A. Lit. # 30120-99 Rev. 1.0/04-13 Copyright © 2013 McCrometer, Inc. McCrometer, McCrometer CONNECT and NanoCourier are all trademarks of McCrometer, Inc. All printed material should not be changed or altered without permission of McCrometer. Any published technical data and instructions are subject to change without notice. Contact your McCrometer CONNECT representative for current technical data and instructions.