CAPACITY STOCKPILING The McCloskey TS4065 sets the standard for high capacity, high mobility stackers. The TS4065 comes with an impressive array of features, including a large hopper, full-length guarding, an easily accessible engine bay, an impact section under the feed boot and an adjustable feed boot height. When the TS4065 arrives at a job site, it takes only a few minutes to set up and get to work. As is the case with all McCloskey stackers, the TS4065 features a setback design for maximum stockpiling. At 65’ long, the TS4065 is the entry point for McCloskey tracked stackers, which are also available in 80’, 100’ and custom lengths. Tracks For maximum mobility, tracks allow the stacker to be easily moved on its own. Large Hopper The large hopper allows operators to make the most efficient use of the TS4065’s high volume capabilities. Stockpiling Ability At 40” wide and 65’ long, the conveyor is able to handle large amounts of product. Full Safety Guarding Full-length flashing minimizes nip points, increasing safety. Power Unit 49hp / 36.5kW Tier III Diesel power unit is easily accessible for service. Engine: 49 hp (36.5 kw) Tier III Diesel Transport Height: 7’ 10” (2.39m) Transport Length: 43 2” (13.15m) Transport Width: 7’ 4” (2.23m) Stockpiling Height: 25’ 10” (7882mm) Weight: TBA TS4065 HIGH CAPACITY STOCKPILING www.mccloskeyinternational.com McCloskey International reserves the right to make changes to the information and design of the machines on this brochure without reservation and notification to the users. Information at time of print considered accurate – McCloskey International assumes no liability resulting from errors or omissions in this document.