Specification Data Sheet Approvals & Certifications UL 142, ULC S601-14 UN 31A/Y, ADR, IBC AS 1940, AS 1692 Compliant with PPG2 & PPG26 Design Features UN (United Nations) approved bunded Fuel Tanks, compliant with Pollution Prevention Guidelines (PPG2) Vibration tested to meet current legislation for transportable tanks. Bidirectional forklift pockets, internal baffles and galvanized lifting eyes to allow easy and safe handling. Designed to stack inside shipping containers and across truck beds providing economical transportation. Unique hex corners for extra strength and Hose Openings in front of allow tank to be used when locked. Provisions for pumps and bund alarm as well as feed and return Connections for generator use with provisions for additional feed and returns for multiple generator use. Bunded outer tank capacity 110% of volume and removable inner tank for maintenance or cleaning. Two lifting plates on primary / inner tank, one at each end, which are removable for maintenance/access. Secure lid with lockable access hatch. Space efficient design: Easily stacked 2 high when full and 3 high when empty. SPECIFICATIONS Primary Fitting Plate 2” Fill Point: 1 1⁄2” Level Gauge: 2” Pressure Vacuum Vent: 2” Breather Vent 1 x 1 1⁄2” Feed Socket: 1 x 1 1⁄2” Return Sockets: (with provisions for an additional 1 1⁄2” Feed & 1 1⁄2” Return Secondary Fitting Plate Supplied with blank plates as standard. Can be supplied with optional 1 1⁄2” Socket: 1 1⁄2” Socket Capacity (Litres) 8000 Bund Tank Material Thickness (mm) Capacity (Gallons) 2114 Inner Tank Material Thickness (mm) 1075 Safe fuel fill levels (Litres) *Calculations based on safe fuel fill levels as 95% of total tank capacity & specific gravity of diesel as 0.9 **Information considered accurate at time of printing