Specification Data Sheet Approvals & Certifications UL 142, ULC S601, ULC 653 TSSA B139ON-2006 AS 1940, AS 1692 PPG 2 & PPG 26 compliant BS 799 Design Features Certified and approved bunded Fuel Tanks, compliant with Pollution Prevention Guidelines. Lifting when full certified. Bidirectional forklift pockets, internal baffles & galvanized lifting eyes to allow easy & safe handling. Designed to stack inside shipping containers & across truck beds providing economical transportation. Unique hex corners for extra strength & hose openings in front of allow tank to be used when locked. Provisions for pumps & bund alarm as well as feed and returns. Connections for generator use with provisions for additional feed & returns for multiple generator use. Bunded outer tank capacity 110% of volume & removable inner tank for maintenance. Two lifting plates on primary/inner tank, one at each end, which are removable for maintenance/access. Secure lid with lockable access hatch. Space efficient design: easily stacked 2 high when full & 3 high when empty. SPECIFICATIONS Primary Fitting Plate 2” Fill Point: 1 1⁄2” Level Gauge: 2” Pressure Vacuum Vent: 2” Breather Vent 1 x 1 1⁄2” Feed Socket: 1 x 1 1⁄2” Return Sockets: (with provisions for an additional 1 1⁄2” Feed & 1 1⁄2” Return) Secondary Fitting Plate Supplied with blank plates as standard. Can be supplied with optional 2” Socket: 1” Socket Capacity (Litres) 4500 Bund Tank Material Thickness (mm) 1188 Inner Tank Material Thickness (mm) 1075 Safe fuel fill levels (Litres) *Calculations based on safe fuel fill levels as 95% of total tank capacity & specific gravity of diesel as 0.9 McCloskey International (Headquarters) T: 1-705-295-4925 | F: 1-705-295-4777 [email protected] www.mccloskeyinternational.com

Specification Data Sheet BUNDED TANK Generic Illustration REMOVABLE INNER TANK FH-4500L © Copyright 2015 McCloskey International. All rights reserved. Fuel Hub™ is a trademark of McCloskey International. † McCloskey International reserves the right to make changes to the information and design of the machines without reservation and notification to the users. ** Information at time of print considered accurate – McCloskey International assumes no liability resulting from errors or omissions in this docu