The MC100 SensT2 Terminal is equipped with numerous sensor interfaces. Node-RED™, a simple graphical programming interface supporting various pre-configured transmission protocols, can be used to forward measured values, meter readings, switching statuses and calculations to inhouse servers or visualization software via LTE mobile networks. In many cases the MC100 SensT2 can be used to replace an under-used but cost-intensive electrical PLC controller while simultaneously functioning as an IoT gateway in a single device. Key features & functionalities: • Programmable 4G LTE Sensor Terminal/Gateway • Quectel EC21-E module integrated • Out oft the box ready for mobile Internet communication • OpenWrt 21 based Linux distribution, Kernel 5.4.154, optimized for the ARM-based MC100 Gateway • Node-RED™ – flow-based programming tool pre-installed • Supports comprehensive cloud and server protocols • Configuration via web interface • Free programmable OpenWrt Linux GPS/GNSS (optional) WLAN* (optional) * only Gateway MC Technologies GmbH, Kabelkamp 2, D-30179 Hannover, Germany Tel: +49 511 67 69 99 - 0, E-Mail: [email protected], Website: www.mc-techno

MC100 SensT2 Terminal/Gateway Technical Data General Type Dimensions (W x H x D) Weight Supply voltage Operation temperature Housing Protection class Mounting Wireless module embedded Mobile Supporting networks Transmission rates LTE Transmission rates HSPA+ Transmission rates WCDMA Transmission rates EDGE Transmission rates GPRS Antenna connections Controller, Memory and OS Controller RAM Flash OS Programmable Interfaces controller board (sides) Power Ethernet RS232 RS485 USB Digital inputs Digital outputs CAN LED 1 LED 2 and 3 LED 4 LED 5 SIM SD card GPS WLAN Bluetooth (BT) Interfaces extension...

MC100 SensT2 Terminal/Gateway Variants / Accessoires Variants MC100 SensT2 MC100 SensT2 with GPS MC100 SensT2 with WLAN MC100 SensT2 with GPS, WLAN MC100 SensT2 with GPS, BT Accessories Top-hat rail bracket KIT Power supply / Mount Adapter EU Network cable Data cable MiMo wall antenna Portable antenna GPS antenna for DIN rail mounting 18 W AC/12 V DC 1,5A Cat. 5, 1 m Adapter cable for ASC1, RS232 (SuB D9, female) - 1m - 3pin plug GSM/UMTS/LTE, 2 m RG174, 2x SMA (male) GSM/UMTS/LTE, SMA (male) 1575.42 MHz, 2 dBi, 3 m RG174 SMA (male), magnetic Mistakes and changes are reserved. MC Technologies...