MC100 GPIO Terminal/Gateway The MC100 GPIO gateway is equipped with a wide range of analogue inputs and digital in- and outputs. Node-RED™, a simple graphical programming interface supporting various pre-configured transmission protocols, can be used to forward measured values, meter readings, switching statuses and calculations to inhouse servers or visualization software via LTE mobile networks. In many cases the MC100 GPIO can be used to replace an under-used but cost-intensive electrical PLC controller while simultaneously functioning as an IoT gateway in a single device. Programmable 4G LTE GPIO Terminal/Gateway Quectel EC21-E module integrated Out oft the box ready for mobile Internet communication OpenWrt 21 based Linux distribution, Kernel 5.4.154, optimized for the ARM-based MC100 Gateway Node-RED™ – flow-based programming tool pre-installed Supports comprehensive cloud and server protocols Configuration via web interface Free programmable OpenWrt Linux GPS/GNSS (optional) WLAN* (optional) * only Gateway MC Technologies GmbH, Kabelkamp 2, D-30179 Hannover, Germany Tel: +49 511 67 69 99 - 0, E-Mail: [email protected], Website: www.mc-techno

MC100 GPIO Terminal/Gateway Technical Data General Type Dimensions (W x H x D) Weight Supply voltage Operation temperature Housing Protection class Mounting Wireless module embedded Mobile Supporting networks Transmission rates LTE Transmission rates HSPA+ Transmission rates WCDMA Transmission rates EDGE Transmission rates GPRS Antenna connections Controller, Memory and OS Controller RAM Flash OS Programmable Interfaces controller board (sides) Power Ethernet RS232 RS485 USB Digital inputs Digital outputs CAN LED 1 LED 2 and 3 LED 4 SIM SD card GPS WLAN Interfaces extension board (top) Digital...

MC100 GPIO Terminal/Gateway Variants / Accessories Variants MC100 GPIO MC100 GPIO MC100 GPIO with GPS MC100 GPIO with WLAN MC100 GPIO with WLAN/GPS Accessories Top-hat rail bracket KIT Power supply / Mount Adapter EU Network cable Data cable MiMo wall antenna Portable antenna GPS antenna 2 x 0-20 mA, 2 x 0-10 V 4 x 0-20 mA 4 x 0-20 mA 4 x 0-20 mA 4 x 0-20 mA for DIN rail mounting 18 W AC/12 V DC 1,5A Cat. 5, 1 m Adapter cable for ASC1, RS232 (SuB D9, female) - 1m - 3pin plug GSM/UMTS/LTE, 2 m RG174, 2x SMA (male) GSM/UMTS/LTE, SMA (male) 1575.42 MHz, 2 dBi, 3 m RG174 SMA (male), magnetic Mistakes...