SCD-200
3Pages

Catalog excerpts

Signal Cable Driver SCD-200 Related sensor : Independent input channels for two ICP® sensors Built-in dual channel amplifier for long distance transmis- Piezo sensors sion of vibration signals (up to 500m) • Built-in dual channel envelop detection signal processing according to DIN3832 for roller bearing diagnostic Built-in dual channel integrator for the acceleration signal input, selectable by jumpers Compatible with PMS-300 / PMM-300 or industry standard +24Vdc power supply Digital technology for high repeatability, stability and accuracy Galvanic insulated outputs DESCRIPTION The SCD-200 is a dual channel standalone digital processing module designed for long distance transmission of vibration signals (up to 500m). This module allows accurate and reliable measurement of remotely located piezoelectric sensors for monitoring and diagnostic purpose. The resulting signals are processed in the PMS-300 firstly for the machine condition monitoring (acc. to 10816) and secondly for the roller bearing condition and diagnostic (acc. to DIN 3832). The module is designed for 2 ICP® sensors, typically for X and Y mounting configuration. The SCD-200 is packaged in a compact industrial enclosure with IP66 protection. Principe of operations For each sensor, the module provides two low frequency (<2kHz) signal outputs: • Output 1: Amplified low frequency part of the input signal (<2kHz). Optionally, this signal can integrated with an offset for OK sensor feature. • Output 2: Amplified envelop of the high frequency part of the input signals (between 10 and 40kHz). The resulting signal is a low frequency envelop (<2kHz) which can be processed according to DIN 3832 for roller bearing monitoring and diagnostic.

Open the catalog to page 1

((O)) MCmGLOBAL SPECIFICATION ELECTRICAL CHARACTERISTICS Inputs Channel 1 and 2 input type SCD-200_Datasheet.pub © MC-monitoring SA / 2018-02-21 / English Page 2

Open the catalog to page 2

ORDERING INFORMATION Part type SCD-200 Ordering code 01.200.000 Sensor cable driver (without input / output cable) MC-monitoring Quality certifications LOCAL REPRESENTATIVE MC-monitoring SA Route Andre Piller 19 | PO BOX 97 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : info@mc-monitoring.com

Open the catalog to page 3