Catalogs >
MC-monitoring SA >
PPT-480 - Eagle

PPT-480 - Eagle
3Pages

Catalog excerpts

Smart Linearized Proximity Probe PPT-480 - Eagle Monitoring solution Designed for long life cycles and harsh environments Built-in linearization to specific target mechanism Configurable 4-20 mA output proportional to the displacement measured Axial thrust position Shaft & bearing vibration Typical applications Active temperature compensation Continuous online monitoring Optional configuration kit for setting and calibration Hydrogenerators Pumps, fan, cooling towers... Windturbines DESCRIPTION The PPT-480 Eddy current proximity probes are used for non-contact measurement of shaft vibration and position. The sensor is designed with integrated linearization electronic in order to ensure excellent linearity and active temperature compensation. The built-in oscillator tuned above 750kHz ensures measurement with minimal magnetic runout effect. The PPT-480 can be used either for measurement between 0.2mm and 2.2mm or 0.2mm and 4.2mm. The sensor is powered with +24 Vdc. The embedded sensor head is resistant to shock. The sealed body is resistant to oil and water on both sides of the sensor. The 4-20 mA output interface can be configured for vibration displacement (PkPk or Pk) or gap (average). Optional configuration kit (software, cable and USB adapter) allows to setup the measuring range, the output qualifier (peak-peak, gap, scaling) and the target material, to perform on-site recalibration and to visualise trending values.

Open the catalog to page 1

AA - Protection tube BB - Measuring range Default factory code (bold) : 05.480.000 AAY-BB2-DD1-JJ4-KK1 Part type PPT-990 software H MCm Sensors Manager Vl.0.0 | ^ | 1^-^ MECHANICAL DRAWING Protection tube (L=0,15m) Sensor body Protection tube (L=9,55m) Protection case Cable 5x0.14mm2 MC-monitoring Quality certifications PPT-480_Datasheet.pub © MC-monitoring SA / 2024-01-16 / English MC-monitoring SA Route Andre Piller 19 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : info@mc-monitoring.com

Open the catalog to page 3