Smart Linearized Proximity Probe PPT-280 - Eagle FEATURES • Designed for long life cycles and harsh environments • Built-in linearization electronic Active temperature compensation Built-in digital interface for calibration and sensor configu- Axial thrust position Monitoring solution Shaft & bearing vibration Typical applications Optional : configuration kit for setting and calibration Hydrogenerators Pumps, fan, cooling towers... Gas & steam turbines DESCRIPTION The PPT-280 Eddy current proximity probes are used for non-contact measurement of shaft vibration and position. The sensor is designed with integrated linearization electronic in order to ensure excellent linearity and active temperature compensation. The built-in oscillator tuned above 750kHz ensures measurement with minimal magnetic run out effect. The PPT-280 can be used either for measurement between 0.2mm and 2.2mm or 0.2mm and 4.2mm. The voltage output is directly proportional to the measured distance between the metal target and the sensor tip. The sensor can be powered either with -24V or +24V depending on configuration or ordering code. The embedded sensor head is resistant to shock. The sealed body is resistant to oil and water on both sides of the sensor. Optional configuration kit (software, cable and USB adapter) allows to setup measuring range, power supply type (+24V or –24V) and to perform on-site recalibration.

GREY Analogue output signal CLEAR Shield

ACCESSORIES INFORMATION Part type Ordering Number Calibration and configuration kit including USB adapter, cable and PPT-x80 Manager software MECHANICAL DRAWINGS Version with metal protection tube and push-pull connectors

mcmonitoring ORDERING INFORMATION MC-monitoring SA PPT-280 Datasheet Part type Ordering Number AA - Protection tube PPT-280 05.280.000 + Code AA-BB-CC-DD-LL N None Y Armor N Without push-pull connector Y With push-pull connector Default factory code (bold) : 05.280.000 AAN-BB2-CC2-DD1-LLN MC-monitoring Quality certifications LOCAL REPRESENTATIVE MC-monitoring SA Route Andre Piller 19 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : [email protected] PPT-280_Datasheet.pub © MC-monitoring SA / 2024-01-16 / English Page 4