MC-monitoring SA PAS_PVS Datasheet Piezoelectric vibration Sensor PAS-101 / PAS-103 / PVS-111 / PVS-113 Monitoring solution International Protection Rating IP68 Polyurethane twisted pair cable up to 50m Annular shear mode for reduced transverse vibrations Shaft & bearing vibration absolute Dual case isolation with Faraday shield Exceptional bias voltage stability at elevated temperatures Stainless steel body protected against shock Typical applications Hydrogenerators Pumps, fan, cooling towers... Gas & steam turbines DESCRIPTION The hermetic sealed industrial piezoelectric accelerometer/velocimeter are designed to monitor the vibration in harsh industrial environment. It uses the industry standard ®ICP 2-wire voltage transmission technic with a 4 mA minimum constant current supply. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Faraday shielding will limit sensitivity to ESD to a minimum. Annular shear mode design prevents from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and temperature compensated design will ensure accurate results over the complete temperature range. The sensor provides a voltage output proportional to the vibration acceleration across the two transmission wires. The DC standing voltage is used for OK detection and the dynamic voltage for vibration monitoring. A second output is available in option to output a 4-20mA processed signal proportional to the RMS value of the acceleration / velocity or to output a voltage signal proportional to the temperature.

GLOBAL SPECIFICATIONS OPERATION Model version Top cable exit Side cable exit Measuring principle Measuring parameter Electrical grounding Shielding Isolation case to shield Sensitivity Sensitivity max error Output impedance Output bias voltage Residual noise (24°C) 1(2.5)Hz to 25kHz 1(10)Hz PxS-1x1 Frequency response ±10% ±3dB PxS-1x3 Frequency response ±10% ±3dB Mounted resonant frequency Dynamic range Transverse sensitivity Linearity Warm up time Power supply Constant current source Voltage Protection PAS-101 M1 PAS-101 M5 PVS-111PAS-103 M1 PAS-103 M5 PVS-113 Piezoelectric annular shear mode...

GLOBAL SPECIFICATIONS (CONTINUED) OPTIONAL TEMPERATURE OUTPUT Model version Parameters Range Sensitivity Bias Voltage Voltage Output Power requirement +2°C to 120°C 10mV/°C 0VDC at 0°C Vout = 10mV/°C * Temperature (°C) Only available if sensor is powered via IEPE ENVIRONMENTAL Temperature range (continuous operation) Humidity / Enclosure Acceleration limit Shock Continuous vibration Base strain sensitivity ESD protection EMC emission EMC immunity Hermetically sealed PHYSICAL Body material Weight (sensor only) Top cable exit Side cable exit Mounting screw Mounting torque WIRING DIAGRAMM (applies...

ORDERING INFORMATION Piezoelectric Accelerometer Sensor ordering options (PAS) 01.10A.BCC DD - EE - F - T 01.10 A B CC11 DD Sensor type Exit type Installation screw Cable length Sensitivity Optional 4-20mA o/p Glass Seal Connector Optional Temp. Out. void: no output 0: M12 void: no output EE Optional 4-20mA o/p void: no output 10:10mm/s RMS 20: 20mm/s RMS Piezoelectric Velocimeter Sensor ordering options (PVS) 01.11A.BCC - EE - F - T 01.11 A B CC11 Sensor type Exit type Installation screw Cable Lenght F Glass Seal Connector 0: M12 1: MIL-C-5015 2) Option EE is not available with sensitivity 500mV/g...

Notes: 1) Temperature Output (T=1 option) between Blue(-) and White (+) Product name (Connector / Temperature / with or without armor) PAS/PVS Cable Assembly - M12 / 90°C PAS/PVS Cable Assembly - M12 / 90°C / armored PAS/PVS Cable Assembly - MIL / 90°C Shield Connected PAS/PVS Cable Assembly - MIL / 90°C / armored PAS/PVS Cable Assembly - MIL / 120°C PAS/PVS Cable Assembly - MIL / 120°C / armored

MC-monitoring SA PAS PVS Datasheet MECHANICAL DRAWING - PAS-101 / PVS-111 MECHANICAL DRAWING - PAS-103 / PVS-113 MC-monitoring Quality certifications LOCAL REPRESENTATIVE MC-monitoring SA Route Andre Piller 19 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : [email protected] © MC-monitoring SA / 2024-01-17 / English Page 6

MC-monitoring SA PAS PVS Datasheet MECHANICAL DRAWING - PAS-101 / PVS-111 MIL glass seal connector 021,30 MC-monitoring Quality certifications LOCAL REPRESENTATIVE MC-monitoring SA Route Andre Piller 19 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : [email protected] © MC-monitoring SA / 2024-01-17 / English Page 7

MECHANICAL DRAWING - PVS-113 MIL glass seal connector MC-monitoring Quality certifications LOCAL REPRESENTATIVE MC-monitoring SA Route Andre Piller 19 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : [email protected]