Single Axis Magnetic Field Transducer MFT-100 Monitoring solution Single axis magnetic field measurement system Measuring range up to +/-2 Tesla Easy to install on stator wall without removing the rotor Magnetic flux monitoring Immune to deposits and vibrations Small size and flat design for electrical machines air gap Typical applications Interchangeability of the sensor head Single +24VDC power supply Hydrogenerators Windturbines Gearless millsdrives Turbogenerators DESCRIPTION The MFT-100 is a single-axis high accuracy, linearity and stability magnetic field to analogue current transducer. It is particularly appropriate for mapping the magnetic field in the range to ±2 Tesla. The sensor’s head contains a high quality Hall element. The very thin sensor’s head design allows mounting in the air gap of generators and electrical motors. A novel sensor chip in the probe entirely eliminates influences from DC magnetic field components other than the one measured (Y-axis), so that even for strong no uniform fields no planar Hall effect leads to errors in the output voltage. The transducer consists of a sensor’s head with integral flexible cable of 10 meters connected to a conditioning unit.

Wire color Description Brown +24V power supply White 0V power supply Green Iout+, Isolated 4-20mA output + Yellow Iout-, Isolated 4-20mA output - Clear Output cable shield (not internally connected)

ORDERING INFORMATION Part type MFT-100 Ordering code 03.100.000 Description Magnetic Field Transmitter, including sensor MFS-100 and conditioner MFC-100 Part type MFS-100 Ordering code 03.100.100 Description Magnetic Field Sensor with 10m shielded cable. Factory calibrated. Part type MFC-100 Ordering code 03.100.200 Description Magnetic Field Conditioner with 4-20mA output corresponding to -2 Tesla to +2 Tesla Part type Installation protective tube Ordering code 03.100.900 Description Protective tube for MFS-100 installation ID=5.6mm, OD=10mm, material PA-6, Temperature range -40°C to +120°C....