MC-monitoring SA CPP-xxx Datasheet Capacitive Proximity Probe CPP-xxx Monitoring solution KEY FEATURES • Non-contact measurement • • Operating temperature range: -25°C to 85°C Accuracy unaffected by to the target material Axial thrust position Rust and corrosion resistant Digital temperature drift and nonlinearities compensation Shaft & bearing vibration Typical applications Hydrogenerators Pumps, fan, cooling towers... Gas & steam turbines DESCRIPTION The CPP-xxx capacitive proximity transducer is a highly accurate and versatile non-contact measurement device for monitoring shaft vibration and position in rotating machines. This series of transducers is designed to measure displacements in three different ranges: 0.22.2mm, 0.4-4.4mm or 0.4-6.4mm, providing flexibility for different applications. The transducer's sensitivity ranges from 2.67 µA/µm to 8 µA/µm, depending on the measurement range. The output range is 4.0-20.0 mA, providing a reliable signal for monitoring purposes. The transducer has a high level of linearity within ±2% to ±6% deviation from a straight line, ensuring accurate measurements. It has a repeatability of less than 0.2%, and a frequency response of 0 to 1.0kHz, which is suitable for measuring high-frequency vibrations in rotating machines. The transducer is not sensitive to the type of target material as long as it is conductive. It is designed for operation in a temperature range of -25°C to 85°C and has an IP67 ingress protection rating, making it suitable for use in harsh industrial environments. The sensor is powered with +24V industry-standard.

mcmonitorinqGLOBAL SPECIFICATIONS MC-monitoring SA CPP-xxx Datasheet Power supply Current consumption Linear ranges: 10.464.xxx Output range: Temperature sensitivity (mid-range): Max. Linearity error (deviation from s 10.464.xxx Overall residual noise 10.464.xxx Repeatability Frequency response (-3dB) Minimum target size +24Vdc ± 10% < 90mA (at output full scale) ENVIRONMENTAL Temperature range (sensor & cable) Operation Storage Ingress Protection PHYSICAL Standard probe design Maximum tightening torque Sensor body length Integral cable length Sensor body material M20x 1.5 with integral cable...

MC-monitoring SA CPP-xxx Datasheet MECHANICAL DRAWINGS BROWN PINOUT Dimensions 108 Wire color Description BROWN +24V power supply WHITE 0V power supply CLEAR Cable shield to be grounded

MC-monitoring SA CPP-xxx Datasheet ORDERING INFORMATION Ordering code : MC-monitoring Quality certifications LOCAL REPRESENTATIVE MC-monitoring SA Route Andre Piller 19 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : [email protected]