video corpo

Ultrasonic Industrial Sensor
12Pages

{{requestButtons}}

Catalog excerpts

Ultrasonic Industrial Sensor - 1

Polymer Electric Product information Ultrasonic Industrial Sensor USi GmbH & Co. KG Polymer Electric Örlinger Straße 1–3 89073 Ulm GERMANY Tel.: +49 731 2061-0 Fax: +49 731 2061-222 E-mail: info.ulm@mayser.com Internet: www.mayser.com

Open the catalog to page 1
Ultrasonic Industrial Sensor - 2

Important information Read through the product information carefully. It contains important information on operation, safety and maintenance of the product. Retain the product information for later reference. Always observe the safety instructions on the following pages under ATTENTION. Only use the product for the purpose described in the product information. © Mayser Ulm 2015 2/12 Ultrasonic industrial sensor USi

Open the catalog to page 2
Ultrasonic Industrial Sensor - 3

One USi – countless possibilities The ultrasonic industrial sensor USi is an extremely versatile sensor. The range of possible applications is almost unlimited. Here is a small selection: Object detection Conveying check Position detection Area monitoring Distance detection Obstacle detection Fill level monitoring Free positioning, flexible parameterisation and a high protection type – there seem to be no limits for the USi. Only the use as a protective device is excluded. Optimised for Medium air The ultrasonic industrial sensor USi is designed for industrial use in the medium air. In this...

Open the catalog to page 3
Ultrasonic Industrial Sensor - 4

Special features of the USi Separate sensory system The Ultrasonic transducer and the signal processing are two separate units. The advantages: + very small sensors (ultrasonic transducers) for maximum flexibility. + robust signal evaluation unit in aluminium die casting for maximum performance. + only one signal evaluation unit for two sensors. Simple parameter assignment Parameter assignment of the USi is quick and easy with the parameter assignment software (optional). Connect the USi to the computer with the USB cable, start the software, alter the parameters with mouse and keyboard and...

Open the catalog to page 4
Ultrasonic Industrial Sensor - 5

Special sound field geometry The sonic lobe of the USi is very elliptic – a clear advantage, if detection is required in confined environments. Note: The representations refer to the USi in the condition as supplied. Measurement object: steel rod with Ø 10 mm. If parameters have been changed or if a different measurement object is used, the representations will change accordingly. Mobile sensor system The USi can even detect objects which approach or move away from it at relatively high speed. The USi easily copes with speeds of up to 2 m/s. Conversely this means that the USi is suitable...

Open the catalog to page 5
Ultrasonic Industrial Sensor - 6

Modular principle It is therefore possible to deliver exactly what you need for your application. Nothing more, but also nothing less. Subject to technical modifications. 6/12 Ultrasonic industrial sensor USi Possible applications for the USi are as varied as life itself. It is therefore only logical that the sensor system is not offered in rigid sets but as a flexible modular system.

Open the catalog to page 6
Ultrasonic Industrial Sensor - 7

How the USi works Multitool The USi is not just an ultrasonic sensor. It is a reflex switch, a reflex barrier and a sonic barrier in one. Connected with further USis, a multisensor system can even be set up. And disturbance variables are less daunting with the diagnostic function of the parameter assignment software (optional). Tool Reflex switch Objects are detected as present or absent. Reflex barrier 1 sensor and 1 object which represents the limit of the reflex barrier If the taught-in object is detected, the reflex barrier is free. Sonic barrier 2 sensors and parameter Sensors are...

Open the catalog to page 7
Ultrasonic Industrial Sensor - 8

Do you need a change-over contact? – No problem. Simply combine the two outputs which are assigned to a sensor, e.g. OUT 1.1 as normally open contact and OUT 1.2 as normally closed contact. Outputs Type 3 operating modes The USi offers three operating modes: Operating mode “1 Range” Detect + Measure Operating mode “2 Ranges” Detect Operating mode Window Detect + Measure Standard operating mode If switch point SP1 selection is larger than 1 cm, the USi-PP automatically changes to operating mode “2 Ranges” . As for operating mode “2 Ranges” , except the sensor-proximal detection field (white)...

Open the catalog to page 8
Ultrasonic Industrial Sensor - 9

Parameterisation with a clear structure Polymer Electric The parameter assignment software (optional) is clearly structured and clearly divided into the areas standard, expert mode and diagnos- In the Standard tab, you can change the basic settings. In the Expert mode tab, you can directly configure the individual parameters. Echo verb re ite rung ab Wandlerdaten schreiben The Diagnostics tab helps you to find and estimate disturbance variables as well as configure special applications: visualisation of the complete measurement distance serves as both feedback and help at All settings can...

Open the catalog to page 9
Ultrasonic Industrial Sensor - 10

Technical data The “type” information refers to the USi in the condition supplied to the customer. If parameters are changed, these values change. The thereby potential bandwidth is indicated by “.. to ...” . . USi-PP / USi-IP / USi-UP Testing basis Connecting voltage US Voltage tolerance Rated current Power consumption DC 15 to 30 V, reverse polarity protection typically 80 mA (40 to 150 mA) < 2.5 W (without load) Detection functions Ultrasonic frequency Measurement frequency Measurement distance, max. Switch Sensor (USi-IP / -UP) Blind zone Switch Sensor (USi-IP / -UP) Opening angle...

Open the catalog to page 10
Ultrasonic Industrial Sensor - 11

Parts list Designation Part number USi-PP Master evaluation unit, Master can be used as a stand-alone unit Slave can be used as a stand-alone unit USi-IP Master evaluation unit, Master can be used as a stand-alone unit Slave can be used as a stand-alone unit USi-UP Master evaluation unit, Master can be used as a stand-alone unit Slave can be used as a stand-alone unit Sensor ultrasonic transducer ps/mt/18x4/m with 1.5 m cable Extension cable for ultrasonic transducer sensor cut-to-size including M8 socket and M8 plug Length: 1.5 m O-Ring set 18×2.5 mm, consisting of: 2× O-Ring 18.0 × 2.5...

Open the catalog to page 11
Ultrasonic Industrial Sensor - 12

Part number Enclosure Set M30 for ultrasonic transducer, consisting of: Enclosure set horizontal for ultrasonic transducer, consisting off: 1× Enclosure horizontal 2× O-Ring 17.5 × 2.0 mm Enclosure set vertical for ultrasonic 7502906 transducer, consisting of: 1× Enclosure vertical 2× O-Ring 17.5 × 2.0 mm Mounting rail adapter set for USi, for evaluation unit on 35 mm mounting rail, consisting of: 1× Aluminium adapter 4× screws SK M5×10 self-cutting Unit cable M12x8 / USi, cut-to-size incl. lead ferrules and ready-to-connect shielding braid Length: 2 m Parameter assignment software for USi...

Open the catalog to page 12

All Mayser catalogs and technical brochures

  1. Product catalog

    268 Pages

  2. Safety shoe

    4 Pages

Archived catalogs

  1. Safety Mats SM

    20 Pages

  2. Safety Bumper

    10 Pages

  3. Safety Edges

    34 Pages

  4. Safety Bumpers

    10 Pages