Catalogs >
Mayser >
Seat occupancy Sensor SBS

Seat occupancy Sensor SBS
4Pages

Catalog excerpts

Seat occupancy sensor SBSEN | Product information Mayser GmbH & Co. KG Orlinger StraBe 1-3 89073 Ulm GERMANY Phone: +49 731 2061-0 Fax: +49 731 2061-222 E-mail: info.ulm@mayser.com Internet: www.mayser.com

Open the catalog to page 1

Areas of application Seat Belt Reminders (SBR), Supplemental Restraint Systems (SRS) or automatic air conditioning (AUTO A/C) systems used for multiple climatic zones, the total efficiency of such intelligent systems does not prove itself until it is known if the individual seats are occupied or not. Special sensors, integrated in the seats, detect if the seats are occupied or not, thus providing smooth function of these systems. Thanks to its simple design, the Mayser tactile seat occupancy sensor SBS can be integrated into almost any type of vehicle seat. Concept As a part of the Seat...

Open the catalog to page 2

Operation As soon as the seat occupancy sensor SBS is actuated, the seat is classified as occupied. When the SBS is not actuated, the seat is classified as not occupied. A short circuit in the supply lines is recognised as 0 ohm. As an option, a diagnostic resistor Rd can be integrated in order to recognise a break in the lines. When the seat belt is not fastened, the following typical chart ensues Subject to technical modifications. Application Two types of application are possible. 1. Positioned on the B-surface of the seat foam. Prior to the foaming process the sensor is introduced into...

Open the catalog to page 3