Safety shoeEN | Product information Mayser GmbH & Co. KG Bismarckstrasse 2 88161 Lindenberg GERMANY Phone: +49 8381 507-0 Fax: +49 8381 507-101 E-mail: [email protected] Internet: www.mayser.com

Areas of application The safety shoe is designed as collision protection for the level control of passenger, baggage, catering and maintenance platforms. Pressure on the surface activates the interior switches. Its especially rugged installation makes it perfectly suitable for use in a rough environment and provides excellent water resistance on the surface. The function of the safety shoe is guaranteed even in wet conditions, with a water level of up to 10 mm in the position of use. Concept Switches are installed in the safety shoe as normally closed contact (NC) or normally open contact (NO)...

Operation The lifting platform is moved to the body of the airplane and the safety shoe is positioned between movable platform and object. The loading lowers the airplane which would make it collide with the lifting platform. The safety shoe helps detect this. Pressure is applied on the safety shoe during the pressing in. This triggers actuation and the control of the lifting platform receives the command to lower itself until the safety shoe is relieved again. Other versions (also with monitoring resistor) available on request. Subject to technical modifications.

Maintenance and cleaning The sensors are virtually maintenance-free. Regular inspection Depending on the load, the sensors are to be tested at regular intervals (at least monthly) • for correct functioning: by activation or by applying the relevant test sample. • for damage: by visual checking. Cleaning If necessary, clean the sensor with a mild cleaning agent. Technical data 4/4 Safety shoe www.mayser.com