Safety Bumpers
10Pages

Safety Bumper Safety Bumpers are protective devices comprising sensor(s), control device and output signal switching device(s). Sensor The sensor is that part of the Safety Bumper to which the actuating force is applied in order to produce a control command. Control device The control device is that part of the Safety Bumper, which reacts to the status of the sensor and which produces those output signals which are transmitted to the machine control system. The output signal switching device is that part of the control device which is connected to the machine control system and transmits safety output signals. control unitsensor outputsensorThe control unit is made up ofcontrol device and output signal switching device(s). Actuating force The following points should be considered when choosing thesensors: -temperature range -response time - protection class (standard: IP65) -environmental considerations (oil, coolant, ...) sensorcontrol device > output signal switching device machinecontrol system Safety Bumper PLEASE NOTE: The certification of design becomes invalid if our products are used in combination with control units or sensors which do not comply with the tested types. > Subject to technical modifications. 210498 Mayser P.O. Box 1362 D-88153 Lindenberg Tel. +49-8381/507-0 Fax +49-8381/507-146 >

sensorcontrol unit(control device withoutput signalswitching device)monitoringresistorThe Safety Bumper comprisessensor control device and output signal switching device. The control device and the output signal switching device are combined in the control unit. Types > PowerMotor SB/BKthrough sensor with cable exit on both sidesor for connecting up an external monitoring resistorSB/Wwith integrated monitoring resistorFor your safety:The sensor and the connecting cable are constantly monitored for function. A control function is attained by bridging the conductive areas with a monitoring...

control unit(control device withoutput signalswitching device)sensorThe Safety Bumper comprisessensor control device and output signal switching device. The signal processing and the output signal switching device are combined in the control unit. Type SB/BKthrough sensor with cables on both endsFor your safety:The sensor and the connecting cable are constantly monitored for function. The monitoring resistor is not required due to signal transmission feedback > PowerMotor Combination of sensors Cable connection (standard)-cabel: LiYY 5 mm; 2x 0.25 mmز Cu-length of cable: 2 mcustomized...

Prerequisite: The follow-up systemmust be in accordance with category 3 as per EN 954-1. The Safety Bumper comprises only the sensor.The sensor can be connected either by means of a follow-up safety system or directly into the machine control system. Type SB/Microwith integrated break contact principleFor your safety:The break contact principle monitors the system for a break in connection. The switch contacts are force guided. machinerelay controlsensor Combination of sensors Combinations:-connection of several sensors -no control unit needed Cable connection (standard)-cable: 4 GKWG-AX 1x...

The sensors can be supplied in lengths ranging from 100 to 4,000 mm. Special designs are available on enquiry. cable exit (KA) also customized as requiredKA(right)KA(left) 100 to 4,000 mm > Standard sensors are available in 2 forms:Form Aparallel format Y = 40 Form Bcone shaped format Y = 100; 150; 200 > Form BForm A Rail width Rail width Bumper depthBumper depth All-purpose mounting with M 6 screws or nuts in continuous grooves in the C-rail. > construction switching energytransfer elementsensor EN 24014 andM6 nut EN 24035mounting railfor M6 screwC-railfoam Subject to technical...

Form: A Rail width: Y = 40 Bumper depthavailable: X = 60 to 150 Form: B Rail width: Y = 100 Bumper depthavailable: X = 60 to 200 Form: B Rail width: Y = 150 Bumper depthavailable: X = 60 to 300 Form: B Rail width: Y = 200 Bumper depthavailable: X = 60 to 500 > Subject to technical modifications. 210498 Mayser P.O. Box 1362 D-88153 Lindenberg Tel. +49-8381/507-0 Fax +49-8381/507-146 >

The Safety Bumpers can be supplied in various shapes and sizes for special applications.Forms:U-shaped, L-shaped, ...Surface:-various skins and colours ( single colour, striped, ...) -protective coverings for high mechanical loads -heat resistant casingsSpecial solutions for use in hazardous locations possible. Customized mounting rail can be accomodated. > Special designs If you need special shapes or special monitoring devices, get in touch with Maysers project engineers directly.Mayser Safety SystemWe make progress safe! Trapezium-shape U-shape > Subject to technical modifications....