NEW 1200W~1500W Fiber Lasers

Product catalog summary

Overview: The document provides technical specifications for the MFSC Series Fiber Laser models (MFSC-1200, MFSC-1300, MFSC-1500) produced by Maxphotonics Co. Ltd. These lasers are designed for cutting various metal materials.

1. Optical Characteristics:

Mode of Operation: Continuous Wave (CW) and Pulse.
Polarization: Random.
Nominal Output Power: 1200W, 1300W, 1500W.
Output Power Tunability: 10% to 100%.
Central Emission Wavelength: 1080±10 nm.
Transmission Bandwidth: 3 nm (Typical), 5 nm (Maximum).
Power Output Stability: Short period: ±1~3%, Long period: ±2~5% over 24 hours.
Laser Turn-on/Turn-off Time: 50/30 µs (Typical), 80/50 µs (Maximum).
Power Modulation Frequency: 50 kHz.
Internal Red Beam Power: 150 µW.
Output Fiber Length: 15 m.
Output Fiber Bending Radius: 200 mm.
Beam Delivery Optics: Water-cooling Connector (QBH).

2. General Characteristics:

Operating Voltage: Single Phase 200-240V AC, 50/60Hz.
Maximum Power Consumption: 5.2 kW at 20°C.
Weight: 88 kg.
Dimensions: 970 x 483 x 169 mm.
Operating Temperature Range: 10°C to 35°C.
Operating Humidity Range: 10% to 90% (non-condensing).
Laser "Cold Start" Temperature: 26°C to 28°C.

3. Water-cooling Conditions:

Cooling Mode: Water Cooling.
Water-out Temperature: 26°C to 28°C.
Water Pressure: 4 to 6 Bar.
Water Flow: Minimum 40 L/min.
Lift: Minimum 35 m.
Water Chiller Refrigerator Power: Suggest above 3P chiller.

Application: Suitable for cutting a variety of metal materials including carbon/mild steel, silicon steel, stainless steel, aluminum alloy, titanium alloy, galvanized sheet, pickling plate, aluminum zinc plate, and copper.

Catalog excerpts

Maxphotonics Co. Ltd Add: No.4, Furong Industrial Park, Third Furong Road, Xinqiao, Shajing Town, Bao'an, Shenzhen, Mobile: +86 18816741969 Fax: +86-755-29902782 Tel: +86 755 86592500 http://en.maxphotonics.com/ E-mail: [email protected] Skype: catherine_cathy824

Open the catalog to page 1