*mydirectindustry

MFSC-300

Product catalog summary

Overview: The document provides technical specifications for the MFSC Series Fiber Laser, specifically the MFSC-300 model, produced by Maxphotonics Co. Ltd. This fiber laser is designed for cutting various metal materials.

1. Optical Characteristics:

Mode of Operation: Continuous Wave (CW) and Pulse.
Polarization: Random.
Nominal Output Power: 300W with tunability from 10% to 100%.
Central Emission Wavelength: 1080±10 nm.
Transmission Bandwidth: Typically 3 nm, maximum 5 nm.
Power Output Stability: Short period stability is ±1~3%, long period stability is ±2~5% over 24 hours at full power.
Laser Turn-on/Turn-off Time: 50/30 microseconds typical, 80/50 microseconds maximum.
Power Modulation Frequency: 50 kHz at full power.
Internal Red Beam Power: 150 µW.
Output Fiber Length: 12 meters with a bending radius of 200 mm.
Beam Delivery Optics: QBH/QCS Connector.

2. General Characteristics:

Operating Voltage: Single Phase 200-240V AC, 50/60Hz.
Weight: 55 kg.
Dimensions: 750 x 483 x 169 mm.
Operating Temperature Range: 10°C to 40°C.
Operating Humidity Range: 10% to 90% non-condensing.
Laser "Cold Start" Temperature: 26°C to 28°C.

3. Water-Cooling Conditions:

Cooling Mode: Water Cooling QBH or Air Cooling QCS.
Water-out Temperature: 26°C to 28°C.
Water Pressure: 4 to 6 Bar.
Water Flow: Minimum 40 L/min.
Lift: Minimum 35 meters.
Water Chiller Power: Suggested ≥1.5P chiller.

Application: Suitable for cutting a variety of metal materials including carbon/mild steel, silicon steel, stainless steel, aluminum alloy, titanium alloy, galvanized sheet, pickling plate, aluminum zinc plate, and copper.

Catalog excerpts

Maxphotonics Co. Ltd Add: No.4, Furong Industrial Park, Third Furong Road, Xinqiao, Shajing Town, Bao'an, Shenzhen, China Mobile: +86 18816741969 Fax: +86-755-29902782 Tel: +86 755 86592500 http://en.maxphotonics.com/ E-mail: [email protected] Skype: catherine_cathy824

Open the catalog to page 1