MFP-100 Maxphotonics 100W Fiber laser source laser marking engraving cutting

Product catalog summary

Q-Switched Pulse Fiber Laser Specification

General Information: The document provides specifications for the MFP-100 model of Q-Switched Pulse Fiber Lasers manufactured by Maxphotonics Co. Ltd., located in Shenzhen, China.

Specifications:

Central Wavelength: 1060~1070 nm
Polarization: Random
Average Output Power: 100±5 W
Energy Per Pulse: 1 mJ at 50 (100) KHz
Beam Quality (M²): <2.5
Beam Diameter: 5~9 mm at 1/e²
Power Stability (t>5h): <5%
Frequency Tunable Range: 50 (100)~100 (200) KHz
Pulse Width: ≤200 (100) ns at 50 (100) KHz
Power Tunable Range: 10~100%
Operation Voltage: 220/110 AV

Physical Characteristics:

Dimensions: 540*483*177 mm
Weight: Not specified
Cooling Method: Air Cooling for Laser Source; Air/Water Cooling for Isolator

Environmental Conditions:

Operating Temperature: 10～35°C
Operating Humidity: 10%～95%
Stockpile Temperature: -10～ +60°C

Applications: The laser is suitable for marking on metal, non-metallic plating materials, plastic rubber, industrial plastics, ceramics, deep carving, fine processing, and special material processing.

Catalog excerpts

MFP-100 Maxphotonics 100W Fiber laser source laser marking engraving cutting-1

Add:No.4 Building, FurongThird Road, Xinqiao Furong Industrial Park Shajing Town, Bao'an, Shenzhen, China 518125 Tel:+86-755-86261625--811 Homepage:http://en.maxphotonics.com/ Q-Switched Pulse Fiber Laser Specification Type Central Wavelength Average Output Power Beam Quality Beam Diameter Frenquency Tunable Range Pulse Width Power Tuable Range Operation Voltage Laser Dimension Weight Laser Source Cooling Method Isolator Cooling Method Air Cooling / Water Cooling Operate Temperature Operating Humidity Stockpile Temperature Application: Marking on metal, part of the non-metallic plating materials, plastic rubber, industrial-used plastics, ceramics and other marking; Deep carved; Fine processing; Special mat

Open the catalog to page 1