*mydirectindustry

Catalogs
Maxphotonics Co., Ltd
MAX CW 800W Cutting Data on ss & ms

MAX CW 800W Cutting Data on ss & ms

Product catalog summary

Overview: This document provides the cutting parameters for the MFSC-800W laser cutting machine by Maxphotonics Co. Ltd. It includes specifications for cutting stainless steel and carbon steel of various thicknesses.

Specifications:

Stainless Steel (SUS): The document outlines parameters for cutting stainless steel with thicknesses of 1mm, 2mm, and 3mm. The power is set at 100% for all thicknesses, with varying speeds and focus settings. Nitrogen (N2) is used as the assist gas at a pressure of 1.5 Mpa.
Carbon Steel (MS): Parameters are provided for cutting carbon steel ranging from 1mm to 10mm in thickness. The power remains at 100%, with oxygen (O2) as the assist gas at varying pressures. The focus and cutting height are adjusted according to the thickness.

Procedures:

For stainless steel, the cutting is done directly for 1mm and 2mm thicknesses, while a subsection drilling method is used for 3mm.
For carbon steel, the cutting method progresses from direct to progressive as the thickness increases.

Recommendations:

The document advises optimizing the parameters based on the actual cutting effect, as the provided parameters are for reference only.

Catalog excerpts

New Add: No.4, Furong Industrial Park, Third Furong Road, Xinqiao, Shajing Town, Bao'an, Shenzhen, China 518104 Mobile: +86 18816741969 Fax: +86-755-29902782 Website: http://en.maxphotonics.com/ E-mail: [email protected] MAX Cutting Data Sheet MFSC-800W Speed (m/min) Note: This process parameters for reference only , please optimize parameters reasonablly according to act

Open the catalog to page 1

All Maxphotonics Co., Ltd catalogs and technical brochures

Archived catalogs

Maxphotonics 30W 915nm fiber coupled Semiconductor laser module
1 Page
Maxphotonics 150W 915nm fiber coupled Semiconductor laser module
1 Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list