- Catalogs
- Maxphotonics Co., Ltd
- MAX 500W (MFSC-500) Cutting Data Sheet
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
MAX 500W (MFSC-500) Cutting Data Sheet
1 / 1 PageView full catalog
MAX 500W (MFSC-500) Cutting Data Sheet
Product catalog summary
Introduction
This document provides the cutting data sheet for the MFSC-500W laser cutting machine by Maxphotonics Co. Ltd. It includes specifications for cutting stainless steel and carbon steel using different parameters.
This document provides the cutting data sheet for the MFSC-500W laser cutting machine by Maxphotonics Co. Ltd. It includes specifications for cutting stainless steel and carbon steel using different parameters.
Specifications
- Stainless Steel (SUS): The cutting parameters vary based on material thickness. For 1mm thickness, use 100% power, 8-10 m/min speed, 1.5 Mpa nitrogen gas pressure, -1.0 mm focus, and 0.4 mm cutting height with direct drilling. For 2mm, adjust speed to 1.5-2.5 m/min, gas pressure to 1.8 Mpa, and focus to -2.0 mm. For 3mm, use 0.3-0.6 m/min speed, 1.8 Mpa gas pressure, -3.0 mm focus, and subsection drilling.
- Carbon Steel (MS): Parameters also depend on thickness. For 1mm, use 100% power, 8-10 m/min speed, 0.8 Mpa oxygen gas pressure, 1.0 mm focus, and 1.0 mm cutting height with direct drilling. For 2mm, adjust speed to 3.0-4.0 m/min and gas pressure to 0.6 Mpa. For thicknesses from 3mm to 6mm, progressively reduce speed and gas pressure while adjusting focus and cutting height accordingly.
Recommendations
These parameters are for reference only. It is advised to optimize the parameters based on the actual cutting effect to achieve the best results.
These parameters are for reference only. It is advised to optimize the parameters based on the actual cutting effect to achieve the best results.
See more
Catalog excerpts
New Add: No.4, Furong Industrial Park, Third Furong Road, Xinqiao, Shajing Town, Bao'an, Shenzhen, China 518104 Mobile: +86 18816741969 Fax: +86-755-29902782 Website: http://en.maxphotonics.com/ E-mail: [email protected] MAX Cutting Data Sheet MFSC-500W Speed (m/min) Note: This process parameters for reference only , please optimize parameters reasonablly according to actual
Open the catalog to page 1All Maxphotonics Co., Ltd catalogs and technical brochures
150W-1500W QCW Fiber Laser V1.136 Pages
M5-BOX Laser Marking Machine2 Pages
category(English Version）V1.332 Pages
New catalogue for Maxphotonics18 Pages
1500W Cutting Data Sheet2 Pages
1000W Cutting Data Sheet2 Pages
800W Cutting Data Sheet2 Pages
500W Cutting Data Sheet2 Pages
MFSC-3003 Pages
1500W Fiber Laser Resonator4 Pages
NEW 1200W~1500W Fiber Lasers3 Pages
NEW 200W~1000W Fiber Lasers4 Pages
MFP-20H2 Pages
Q-switched Laser 10W~100W4 Pages
MOPA Laser Source2 Pages
Smart Laser Marker2 Pages
High Power collimator1 Page
NEW MOPA 20W Specification2 Pages
Archived catalogs
Related Searches
- Marking machine
- Laser marking machine
- Signal amplifying integrated circuit
- Benchtop marking machine
- Pulsed laser
- Manual cleaning system
- Fiber laser marking machine
- Cooled laser
- Precision laser
- Visible laser
- Compact laser
- Fiber optic laser
- Industrial laser
- Air-cooled laser
- Laser cleaning machine
- Continuous wave laser
- Marking laser
- Continuous laser
- OEM laser
- High-power laser
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.