6000W Multi-module CW Fiber Laser V1.5
52Pages

{{requestButtons}}

Catalog excerpts

6000W Multi-module CW Fiber Laser V1.5 - 1

MFMC 6000W CW Fiber Laser USER GUIDE Maxphotonics Co.,Ltd.

Open the catalog to page 1
6000W Multi-module CW Fiber Laser V1.5 - 2

Copyright © Maxphotonics Co Ltd ( here after referred to as Maxphotonics). All rights reserved. You may not copy, modify, transmit or publish this publication, in any form, in any media or by any means, without the prior written permission of Maxphotonics, except as allowed under applicable copyright laws. Permitted copies shall bear the same copyright and proprietary notices that were contained on the ori ginal version. Maxphotonics believes that the information provided is accurate and reliable; however Maxphotonics makes no warranty, representation,expression or implication that this...

Open the catalog to page 2
6000W Multi-module CW Fiber Laser V1.5 - 3

Preface Thank you for using the MFMC Series CW fiber laser from Maxphotonics. We compile this document for you in order that the laser is used and maintained properly. Due to the limited level of the writers, coupled with time constraints, there are some careless mistakes in this document, your understanding and suggestion to help us make an improvement will be much appreciated . Thank you again for using Maxphotonics' products. Please take time to read and understand this User's Guide and familiarize yourself with the operating and maintenance instructions before you use the product. We...

Open the catalog to page 3
6000W Multi-module CW Fiber Laser V1.5 - 4

Company Profile Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in China. It is also the first in China to realize independent intellectual property rights and vertical integration in the core technologies of fiber lasers and optical devices. One of the national high-tech enterprises. Maxphotonics has developed into an internationally renowned laser manufacturer that develops, manufactures and sells fiber lasers and core optical components. It is the second largest domestic fiber laser manufacturer in the domestic market. Maxphotonics specializes in the research,...

Open the catalog to page 4
6000W Multi-module CW Fiber Laser V1.5 - 5

Company Profile………………………………………………………………… Chapter 1 Characteristic Explain …………………………………………… Chapter 2 General Safety Information………………………………………

Open the catalog to page 5
6000W Multi-module CW Fiber Laser V1.5 - 7

Chapter 1 Characteristic Description MFMC Series CW Fiber Laser products provide a wide range of wavelength from 1060nm to 1100nm.The lasers are water-cooled and maintenance-free and with a wall plug efficiency of more than 30% and deliver high efficiency, high reliability and high performance. Maxphotonics' MFMC Series CW Fiber Laser Series are Class 4 laser products and are designed and tested with safety. By following this User Guide and applying sound laser safety practices, it will be a safe and reliable device. Laser light exhibits unique characteristics that may pose safety hazards....

Open the catalog to page 7
6000W Multi-module CW Fiber Laser V1.5 - 8

All safety warning symbols during operating process of the laser include:

Open the catalog to page 8
6000W Multi-module CW Fiber Laser V1.5 - 9

Chapter 2 General Safety Information NOTE : ◎ This device is classified as a high power Class IV laser instrument. It may emit up to 10000W average power from 1060nm to 1100nm. This level of light may cause damage to the eye and skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina. Laser safety eyewear is not provided with this instrument, but must be worn at all times while the laser is operational. Use appropriate laser safety eyewear when operating this device. The manufacturer of the laser system is responsible for the safety compliance...

Open the catalog to page 9
6000W Multi-module CW Fiber Laser V1.5 - 10

Chapter 2 General Safety Information 3-Reference Standard Electromagnetic Compatibility Emission: EN 55011: 5009+A1 : 2010 CISPR 11 : 5009+A1 : 2010 FCC Class A Anti-interference Performance on Electromagnetic Compatibility: EN 61000-3-2:5006+A1:5009+A2:5009 EN 61000-3-3:5008 EN 61326-1: 5006 EN 61000-4-2:5009 EN 61000-4-3:5006+A1:5007+A2:2010 EN 61000-4-4:5004+A1:2010 EN 61000-4-5:5006 EN 61000-4-6:5009 EN 61000-4-11:204 Others-Electromagnetic Compatibility: Classification A of digital instrument complies with Canada ICES-5003 Power Supply Security: EN 61010-1:5001 Laser Security: EN...

Open the catalog to page 10
6000W Multi-module CW Fiber Laser V1.5 - 11

Chapter 2 General Safety Information NOTE: ◎ Performa nces of Maxphotonics MFMC lase r meet the CE EMC certification requirements, the EMC requirements specified in "EMC Directive" of European market, the anti-interference requirements specified in "EMC" standard EN55011 emission and EN61326-1: 5006, and the emission requirements of group 1 classification A specified in EN55011. ◎ In accordance with relevant national standards and requirements, the laser must be classified according to its output power and laser wavelength. All MFMC-Series laser products with high power belongs to Class 4...

Open the catalog to page 11
6000W Multi-module CW Fiber Laser V1.5 - 12

Chapter 2 General Safety Information WARNING : ◎ The Maxphotonics MFMC laser light is strong enough to cut or weld metal, burn skin, clothing and paint. In addition, this light can ignite volatile substances such as alcohol, gasoline, ether and other solvents. During the operating process, the flammable materials around the laser must be isolated. 3.Optical Operating Instructions We strongly recommend that you read the following procedures before operating the laser: 1.Never look directly into the laser output port when the power is turned on. 2.Avoid positioning the laser and all optical...

Open the catalog to page 12
6000W Multi-module CW Fiber Laser V1.5 - 13

Chapter 2 General Safety Information 11.Make sure that the laser is shut down and the power is off before you install or detach cutting heads or collimators. 12.If the equipment is operated in a manner not specified in this document, the protection devices and performance of the equipment may be impaired and the warranty will be voided. CAUTION: ◎ The output of the laser is delivered through a lens with an anti-reflection coating. If the backward-stage light path of your laser has the optical lens, please strictly inspect the lens of the output head and the backwardstage lens of the laser,...

Open the catalog to page 13

All Maxphotonics Co. catalogs and technical brochures

  1. MFSC-300

    3 Pages

  2. MFP-20H

    2 Pages