*mydirectindustry

Catalogs
Maxphotonics Co., Ltd
6000W-15000W Multi-module CW Fiber Laser V1.3

6000W-15000W Multi-module CW Fiber Laser V1.3

Product catalog summary

Preface: This document is a user guide for the MFMC Series CW fiber laser by Maxphotonics, emphasizing the importance of understanding operating and maintenance instructions for safe and effective use. It stresses the necessity of reading the safety information section before operation.

Company Profile: Maxphotonics, founded in 2004, is a leading Chinese manufacturer of fiber lasers, known for its independent intellectual property rights and vertical integration in core technologies. The company specializes in various laser types and optical devices for multiple industrial applications.

Content Overview: The document is structured into chapters covering characteristic descriptions, safety information, product specifications, operation guides, maintenance, disassembly, and warranty statements.

Chapter 1 - Characteristic Description: The MFMC Series offers a wavelength range from 1060nm to 1100nm, featuring water cooling and high efficiency. It is classified as a Class 4 laser product, requiring adherence to safety practices.

Chapter 2 - General Safety Information: This section outlines safety conventions, laser protection requirements, reference standards, and general safety instructions. It emphasizes wearing protective eyewear and avoiding specular reflections, along with guidelines for handling optical and electrical components safely.

Chapter 3 - Product Description: Details the features, module configuration, model designation codes, certifications, and descriptions of the front and back panels, as well as the optical output terminal.

Chapter 4 - Specification: Lists optical and general characteristic parameters, water cooling conditions, and installation environment requirements.

Chapter 5 - Operation Guide: Provides instructions on electrical power connection, interface extension, startup steps, mode and software descriptions, and error listings.

Chapter 6 - Service and Maintenance: Offers maintenance instructions, appearance inspection, cleaning procedures, and installation precautions for the LOE cutting head.

Chapter 7 - Disassembly Guide: Includes unpacking steps and a packing list.

Chapter 8 - Service and Maintenance: Reiterates maintenance notes and service statements.

Chapter 9 - Warranty Statements: Covers general clauses and warranty limitations.

General Safety Information: To ensure safety in the laser working area, suitable enclosures and laser safety signs should be used. Operators must be trained and aware of safety specifications. The laser should not be installed at eye level to prevent exposure to harmful radiation. An air-conditioned room is recommended to maintain optimal operating conditions and prolong the laser's service life. Ensure proper ventilation to avoid overheating and potential hazards from gases and debris.

Additional Safety Information: For further laser safety guidelines, refer to organizations such as the Laser Institute of America and the American National Standards Institute. Compliance with standards like ANSI Z136.1 and IEC 60825-1 is recommended.

Product Description: The MFMC Series CW fiber lasers are compact, high-power lasers designed for industrial applications such as welding and cutting. They offer high-quality output, efficiency, reliability, and a rugged design.

Specifications: Optical Characteristics: The lasers operate in continuous wave mode with output powers ranging from 6000W to 15000W. The emission wavelength is between 1070 nm and 1090 nm. General Characteristics: Operating voltage is 380 VAC, with rated power varying by model. The cooling method is water-cooling, and the operating temperature range is 10°C to 40°C.

Installation Environment Requirements: The installation environment should have a cleanliness grade of 1000 or more stringent. The temperature should be between 10°C and 40°C, and humidity between 10% and 80%. Avoid condensation by maintaining a controlled environment.

Operation Guide: Ensure all electrical and cooling connections are secure before use. Follow the start-up and shutdown procedures carefully to avoid damage. The laser can operate in continuous or pulse mode, with external control available for specific parameter settings.

Operation Guide:

Software Setup: The software is stored on a USB disk and should be regularly updated according to the official website. Installation involves unzipping files, running the setup, and connecting the laser to a PC via a serial port cable.
Control Modes: The system defaults to external control mode, but internal control mode can be selected to manage laser power, frequency, and duty cycle.
Starting the Laser: Enable the host computer signal, start the laser, and confirm prompts to monitor the laser state.

Error Listing:

Fault Alarms: Various alarms such as forward light PD alarm, super-strong backlight alarm, and pump temperature alarm are detailed with protective measures and solutions.
Common Solutions: Include stopping power supply, checking connections, and contacting customer service if issues persist.

Service and Maintenance:

Maintenance Instructions: Emphasizes the importance of clean fiber connectors and provides a list of materials needed for cleaning.
Appearance Inspection: Conducted in a clean room environment, involves checking for dust and damage using a microscope.
Cleaning Procedures: Detailed steps for cleaning protective lenses and quartz rods, including the use of alcohol and cotton swabs.
Installation Precautions: Instructions for installing LOE cutting heads, emphasizing a dust-free environment and careful handling.

Disassembly Guide:

Unpacking Steps: Recommendations for unpacking the laser, including checking accessories against a packing list and using a forklift for safe handling.

Specifications and Procedures:

Ensure straps are tightened and handle is shaken back and forth to secure the strap.
When using a crane, ensure the sling angle does not exceed 90° and pay attention to the direction of the ring.
For repacking, straighten the tongue on the side panels with a hammer before packing.

Disassembly Guide:

If damage is found upon receiving the product, contact Maxphotonics or a local representative immediately.
The laser includes a dehumidifier to prevent condensation; ensure the water cooler is turned off when the laser is off.
Recommendations include adjusting the operating temperature or humidity to avoid the dew point.

Packing List: Includes items such as Fiber Laser, External signal wire, USB Transfer RS232 signal wire, Power Keys, USB disk, Cleaning accessories, and more.

Service and Maintenance:

No operator serviceable parts inside; refer servicing to qualified personnel.
Submit applications for repairs or replacements within warranty scope to Maxphotonics.
Do not send products without RMA; unauthorized returns will be rejected.
Customers are responsible for repair costs if the product is beyond warranty.

Service Statements:

For issues, contact the 7X24 hour service hotline or use online registration via WeChat or the official website.
Prepare information such as Laser model PN, SN code, fault description, and contact details for repair consultations.

Warranty Statements:

Warranty covers defects due to material and production technology within the agreed period.
Warranty does not cover tampered, misused, or improperly installed products.
Customers must report defects within 31 days of discovery.
No third-party rights are granted for repairs or replacements.

Catalog excerpts

6000W-15000W Multi-module CW Fiber Laser V1.3-1

MFMC 6000-15000 CW Fiber Laser Maxphotonics Co.,Ltd.

Open the catalog to page 1

6000W-15000W Multi-module CW Fiber Laser V1.3-2

Copyright © Maxphotonics Co Ltd ( here after referred to as Maxphotonics). All rights reserved. You may not copy, modify, transmit or publish this publication, in any form, in any media or by any means, without the prior written permission of Maxphotonics, except as allowed under applicable copyright laws. Permitted copies shall bear the same copyright and proprietary notices that were contained on the ori ginal version. Maxphotonics believes that the information provided is accurate and reliable; however Maxphotonics makes no warranty, representation,expression or implication that this document...

Open the catalog to page 2

6000W-15000W Multi-module CW Fiber Laser V1.3-3

Preface Thank you for using the MFMC Series CW fiber laser from Maxphotonics.We compile this document for you in order that the laser is used and maintained properly. Due to the limited level of the writers, coupled with time constraints, there are some careless mistakes in this document, your understanding and suggestion to help us make an improvement will be much appreciated . Thank you again for using Maxphotonics' products. Please take time to read and understand this User’s Guide and familiarize yourself with the operating and maintenance instructions before you use the product. We strongly...

Open the catalog to page 3

6000W-15000W Multi-module CW Fiber Laser V1.3-4

Company Profile Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in China. It is also the first in China to realize independent intellectual property rights and vertical integration in the core technologies of fiber lasers and optical devices. One of the national high-tech enterprises. Maxphotonics has developed into an internationally renowned laser manufacturer that develops, manufactures and sells fiber lasers and core optical components. It is the second largest domestic fiber laser manufacturer in the domestic market. Maxphotonics specializes in the research, development,...

Open the catalog to page 4

6000W-15000W Multi-module CW Fiber Laser V1.3-5

Chapter 1 Characteristic Description ……………………………………… Chapter 2 General Safety Information………………………………………

Open the catalog to page 5

6000W-15000W Multi-module CW Fiber Laser V1.3-7

Chapter 1 Characteristic Description MFMC Series CW Fiber Laser products provide a wide range of wavelength from 1060nm to 1100nm.The lasers are water-cooled and maintenance-free and with a wall plug efficiency of more than 30% and deliver high efficiency, high reliability and high performance. Maxphotonics' MFMC Series CW Fiber Laser Series are Class 4 laser products and are designed and tested with safety. By following this User Guide and applying sound laser safety practices, it will be a safe and reliable device. Laser light exhibits unique characteristics that may pose safety hazards. Therefore,...

Open the catalog to page 7

6000W-15000W Multi-module CW Fiber Laser V1.3-8

All safety warning symbols during operating process of the laser include:

Open the catalog to page 8

6000W-15000W Multi-module CW Fiber Laser V1.3-9

Chapter 2 General Safety Information NOTE : ◎ This device is classified as a high power Class IV laser instrument. It may emit up to 30KW average power from 1060nm to 1100nm. This level of light may cause damage to the eye and skin. Laser safety eyewear is not provided with this instrument, but must be worn at all times while the laser is operational. Use appropriate laser safety eyewear when operating this device. 2-Laser Protection 1.Laser Protection Requirements You must wear the safety protective glasses while operating the laser, and rationally select the safety protective glasses according...

Open the catalog to page 9

6000W-15000W Multi-module CW Fiber Laser V1.3-10

Chapter 2 General Safety Information 3-Reference Standard Electromagnetic Compatibility Emission: EN 55011: 5009+A1 : 2010 CISPR 11 : 5009+A1 : 2010 FCC Class A Anti-interference Performance on Electromagnetic Compatibility: EN 61000-3-2:5006+A1:5009+A2:5009 EN 61000-3-3:5008 EN 61326-1: 5006 EN 61000-4-2:5009 EN 61000-4-3:5006+A1:5007+A2:2010 EN 61000-4-4:5004+A1:2010 EN 61000-4-5:5006 EN 61000-4-6:5009 EN 61000-4-11:204 Others-Electromagnetic Compatibility: Classification A of digital instrument complies with Canada ICES-5003 Power Supply Security: EN 61010-1:5001 Laser Security: EN 60825-1:5007...

Open the catalog to page 10

6000W-15000W Multi-module CW Fiber Laser V1.3-11

Chapter 2 General Safety Information NOTE: ◎ Performances of Maxphotonics MFMC laser meet the CE EMC certification requirements, the EMC requirements specified in "EMC Directive" of European market, the anti-interference requirements specified in "EMC" standard EN55011 emission and EN61326-1: 5006, and the emission requirements of group 1 classification A specified in EN55011. ◎ In accordance with relevant national standards and requirements, the laser must be classified according to its output power and laser wavelength. All MFMC-Series laser products with high power belongs to Class 4 products...

Open the catalog to page 11

6000W-15000W Multi-module CW Fiber Laser V1.3-12

Chapter 2 General Safety Information WARNING : ◎ The Maxphotonics MFMC laser light is strong enough to cut or weld metal, burn skin, clothing and paint. In addition, this light can ignite volatile substances such as alcohol, gasoline, ether and other solvents. During the operating process, the flammable materials around the laser must be isolated. 3.Optical Operating Instructions We strongly recommend that you read the following procedures before operating the laser: 1.Never look directly into the laser output port when the power is turned on. 2.Avoid positioning the laser and all optical output...

Open the catalog to page 12

6000W-15000W Multi-module CW Fiber Laser V1.3-13

Chapter 2 General Safety Information 12.If the equipment is operated in a manner not specified in this document, the protection devices and performance of the equipment may be impaired and the warranty will be voided. CAUTION: ◎ The output of the laser is delivered through a lens with an anti-reflection coating. If the backward-stage light path of your laser has the optical lens, please strictly inspect the lens of the output head and the backward- stage lens of the laser, and ensure that there is no dust and any other impurity on the lens. Please note that any macroscopic attachment may cause...

Open the catalog to page 13

6000W-15000W Multi-module CW Fiber Laser V1.3-14

Chapter 2 General Safety Information of the laser is triple-phase AC current (380V AC 3P+3E), which may cause risk of electric shock. 2.When disassembling the laser, turned off the power first . If electrical injury occurs, corrective measures should be taken to prevent secondary injury. The correct treatment process: turn off the power, release the personnel safely, call help, and accompany the injured. 3.The equipment does not have any part which can be maintained by operators, and all the maintenance operations must be finished by the professionals of Maxphotonics. 4.To prevent electrical...

Open the catalog to page 14