Specifications:
The document provides cutting parameters for the MFSC-500 laser cutting machine, focusing on stainless steel 304 and mild steel materials. Key parameters include material thickness, cutting speed, nozzle type, power percentage, focus, gas type, gas pressure, cutting height, and punching details.

Stainless Steel 304 Cutting:
- Thickness: 1-3 mm
- Speed: 0.7 to 10 m/min
- Nozzle: Single
- Power: 100%
- Focus: -1.5 to -3
- Gas: Nitrogen (N2)
- Gas Pressure: 1.50 to 2.00 Mpa
- Cutting Height: 0.3 mm
- Punching: Directly or Secondary with specific parameters

Mild Steel Cutting:
- Thickness: 1-6 mm
- Speed: 0.9 to 6 m/min
- Nozzle: Double
- Power: 100%
- Focus: 0 to 2
- Gas: Oxygen (O2)
- Gas Pressure: 0.80 to 1.20 Mpa
- Cutting Height: 0.5 mm
- Punching: Secondary or Level 3 gradually with specific parameters

Recommendations:
- Stainless steel cutting may result in burrs at corners; use power curve adjustments to mitigate.
- For 1-2 mm mild steel, air cutting is faster and prevents overburning.
- Adjust cutting speed within ±0.3 for thick materials.

Notes:
- Parameters are for reference only; optimize based on actual cutting effects.