Catalogs >
Maxphotonics Co., Ltd >
200W-300L 3D Printing Fiber Laser V1.0

200W-300L 3D Printing Fiber Laser V1.0
1 / 39Pages

Catalog excerpts

200W-300L 3D Printing Fiber Laser V1.0 - 1

MFSC ( 200W/300L) 3D Printing Fiber Laser Series USER GUIDE Maxphotonics Co.,Ltd.

200W-300L 3D Printing Fiber Laser V1.0 - 2

Copyright © Maxphotonics Co., Ltd (hereafter referred to as Maxphotonics). All rights reserved. You may not copy, modify, transmit or publish this publication, in any form, in any media or by any means, without the prior written permission of Maxphotonics, except as allowed under applicable copyright laws. Permitted copies shall bear the same copyright and proprietary notices that were contained on the original version. Maxphotonics believes that the information provided is accurate and reliable; however Maxphotonics makes no warranty, representation, expression or implication that this...

Open the catalog to page 2

200W-300L 3D Printing Fiber Laser V1.0 - 3

Preface Thank you for using the MFMC Series CW fiber laser from Maxphotonics. We compile this document for you in order that the laser is used and maintained properly. Due to the limited level of the writers, coupled with time constraints, there are some careless mistakes in this document, your understanding and suggestion to help us make an improvement will be much appreciated . Thank you again for using Maxphotonics' products. Please take time to read and understand this User's Guide and familiarize yourself with the operating and maintenance instructions before you use the product. We...

Open the catalog to page 3

200W-300L 3D Printing Fiber Laser V1.0 - 4

Company Profile As a large laser manufacturer founded in 2004, Maxphotonics Co., Ltd. specializes in research and development, production and sales of lasers and ancillary products. Maxphotonics owns a number of independent intellectual property rights and patents as well as high-power pulsed fiber laser, high-power fiber laser and high-power fiber amplifier etc. So far, with intellectual property rights and patents, Maxphotonics owns industrial pulsed fiber laser series, CW fiber laser series,QCW laser series,fiber laser for scientific researches, tunable fiber laser, fiber amplifier, ASE...

Open the catalog to page 4

200W-300L 3D Printing Fiber Laser V1.0 - 6

Chapter 5 Disassembly Guide… ………………………………………… 22 … 1-Disassembly Step… ………………………………………………………… 22 2- Packing List… ………………………………………………………………… 23 Chapter 6 Operation Guide… ……………………………………………… 24 1-Notice… ………………………………………………………………………… 24 2-Electrical Power Connection… …………………………………………… 24 3-Extension Interface…………………………………………………………… 25 4-Fiber Connector Inspection and Cleaning Guide……………………… 26 5-Start Step… …………………………………………………………………… 29 6-Mode Description………………………

Open the catalog to page 6

200W-300L 3D Printing Fiber Laser V1.0 - 7

Chapter 1 Characteristic Explain MFSC CW 3D Printing Fiber Laser (MFSC200W/300L) Series products provide a wide range of wavelength from 1060nm to 1100nm. The lasers are air-cooling and maintenance-free and with a wall plug efficiency of more than 25% and deliver high efficiency, high reliability and high performance. Maxphotonics' MFSC CW 3D Printing Fiber Laser (MFSC200W/300L) Series are Class 4 laser products and are designed and tested with safety. By following this User Guide and applying sound laser safety practices, it will be a safe and reliable device. Laser light exhibits unique...

Open the catalog to page 7

200W-300L 3D Printing Fiber Laser V1.0 - 9

Chapter 2 General Safety Information NOTE : ◎ This device is classified as a high power Class IV laser instrument, and the range of wavelength is from 1060nm to 1100nm. This level of light may cause damage to the eye and skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina. Laser safety eyewear is not provided with this instrument, but must be worn at all times while the laser is operational. Use appropriate laser safety eyewear when operating this device. The manufacturer of the laser system is responsible for the safety compliance according to...

Open the catalog to page 9

200W-300L 3D Printing Fiber Laser V1.0 - 10

Chapter 2 General Safety information 3-Reference Standard Anti-interference Performance on Electromagnetic Compatibility: EN 61000-6-4:2007 + A1:2011 EN 61000-6-2:2005 + AC: 2005 EN 61000-3-2:2014 EN 61000-3-3:2013 Power Supply Security: EN 61010-1:2010 EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Laser Security: EN 60825-1:2014 CDRH 21 CFR 1040.10 NOTE: ◎ In accordance with relevant EU and national standards and requirements, the laser must be classified according to its output power and laser wavelength. All MFSC-2000W-4000W-Series laser products with high power belong to Class 4...

Open the catalog to page 10

200W-300L 3D Printing Fiber Laser V1.0 - 11

Chapter 2 General Safety Information called specular reflections. Although these secondary beams may be less powerful than the total power emitted from the primary beam, the intensity may be great enough to cause damage to the eyes and skin as well as surface of materials. WARNING : ◎ You must exercise caution to avoid/minimize specular reflections as these laser radiations are invisible! 2、Safety Instructions of Accessories Optical accessories relevant to the laser, such as light-sensitive elements that may be damaged from exposure to the laser light, video cameras, photomultipliers and...

Open the catalog to page 11