Catalogs >
Maxphotonics Co., Ltd >
2000W-4000W Multi-module CW Fiber Laser V1.1

2000W-4000W Multi-module CW Fiber Laser V1.1
52Pages

Catalog excerpts

2000W-4000W Multi-module CW Fiber Laser V1.1 - 1

USER GUIDE Maxphotonics Co.,Ltd.

2000W-4000W Multi-module CW Fiber Laser V1.1 - 2

Copyright © Maxphotonics Co., Ltd (hereafter referred to as Maxphotonics). All rights reserved. You may not copy, modify, transmit or publish this publication, in any form, in any media or by any means, without the prior written permission of Maxphotonics, except as allowed under applicable copyright laws. Permitted copies shall bear the same copyright and proprietary notices that were contained on the original version. Maxphotonics believes that the information provided is accurate and reliable; however Maxphotonics makes no warranty, representation, expression or implication that this...

Open the catalog to page 2

2000W-4000W Multi-module CW Fiber Laser V1.1 - 3

Preface Thank you for using the MFMC Series CW fiber laser from Maxphotonics. We compile this document for you in order that the laser is used and maintained properly. Due to the limited level of the writers, coupled with time constraints, there are some careless mistakes in this document, your understanding and suggestion to help us make an improvement will be much appreciated . Thank you again for using Maxphotonics' products. Please take time to read and understand this User's Guide and familiarize yourself with the operating and maintenance instructions before you use the product. We...

Open the catalog to page 3

2000W-4000W Multi-module CW Fiber Laser V1.1 - 4

Company Profile Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in China. It is also the first in China to realize independent intellectual property rights and vertical integration in the core technologies of fiber lasers and optical devices. One of the national high-tech enterprises. Maxphotonics has developed into an internationally renowned laser manufacturer that develops, manufactures and sells fiber lasers and core optical components. It is the second largest domestic fiber laser manufacturer in the domestic market. Maxphotonics specializes in the research,...

Open the catalog to page 4

2000W-4000W Multi-module CW Fiber Laser V1.1 - 5

Company Profile………………………………………………………………… Chapter 1 Characteristic Explain …………………………………………… Chapter 2 General Safety Information………………………………………

Open the catalog to page 5

2000W-4000W Multi-module CW Fiber Laser V1.1 - 7

Chapter 1 Characteristic Explain MFMC Series CW Fiber Laser products provide a wide range of wavelength from 1060nm to 1100nm.The lasers are water-cooled and maintenance-free and with a wall plug efficiency of more than 30% and deliver high efficiency, high reliability and high performance. Maxphotonics' MFMC Series CW Fiber Laser Series are Class 4 laser products and are designed and tested with safety. By following this User Guide and applying sound laser safety practices, it will be a safe and reliable device. Laser light exhibits unique characteristics that may pose safety hazards....

Open the catalog to page 7

2000W-4000W Multi-module CW Fiber Laser V1.1 - 8

All safety warning symbols during operating process of the laser include:

Open the catalog to page 8

2000W-4000W Multi-module CW Fiber Laser V1.1 - 9

Chapter 2 General Safety Information NOTE : ◎ This device is classified as a high power Class IV laser instrument. It may emit up to 1500W average power from 1060nm to 1100nm. This level of light may cause damage to the eye and skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina. Laser safety eyewear is not provided with this instrument, but must be worn at all times while the laser is operational. Use appropriate laser safety eyewear when operating this device. The manufacturer of the laser system is responsible for the safety compliance...

Open the catalog to page 9

2000W-4000W Multi-module CW Fiber Laser V1.1 - 10

Chapter 2 General Safety Information 3-Reference Standard Anti-interference Performance on Electromagnetic Compatibility: EN 61000-6-4:2007 + A1:2011 EN 61000-6-2:2005 + AC: 2005 EN 61000-3-2:2014 EN 61000-3-3:2013 Power Supply Security: EN 61010-1:2010 EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Laser Security: EN 60825-1:2014 CDRH 21 CFR 1040.10 NOTE: ◎ In accordance with relevant EU and national standards and requirements, the laser must be classified according to its output power and laser wavelength. All MFSC-2000W-4000W-Series laser products with high power belong to Class 4...

Open the catalog to page 10

2000W-4000W Multi-module CW Fiber Laser V1.1 - 11

Chapter 2 General Safety Information 4-General Safety Instructions 1、Specular Reflection There are often numerous secondary laser beams produced at various angles in the output port of the laser. These divergent beams are produced when the primary beam of laser reflects off a smooth surface, and they are called specular reflections. Although these secondary beams may be less powerful than the total power emitted from the primary beam, the intensity may be great enough to cause damage to the eyes and skin as well as surface of materials. WARNING: ◎ You must exercise caution to avoid/minimize...

Open the catalog to page 11

2000W-4000W Multi-module CW Fiber Laser V1.1 - 12

Chapter 2 General Safety Information 1、Never look directly into the laser output port when the power is turned on. 2、Avoid positioning the laser and all optical output components at eye level. 3、Equip with laser beam casing. 4、Remove the end-cover before switch ON the laser. Or else the output head will be damaged irreversibly. 5、Ensure that all personal protective equipment is suitable for the output power and wavelength range of the laser. 6、Use the laser in a room with access controlled by door interlocks. Post warning signs. Limit the safety areas to operate the laser. 7、Please do not...

Open the catalog to page 12

2000W-4000W Multi-module CW Fiber Laser V1.1 - 13

Chapter 2 General Safety Information impurity on the lens. Please note that any macroscopic attachment may cause extreme damage to lens or burn the laser or any backward-stage light path equipment. ◎ For cleaning instructions of the lens, please refer to the "Optical Fiber Connector Inspection and Cleaning Guide". ◎ Hot or molten pieces of metal may be produced when the laser is under operation. Exercise caution if debris is produced in operation. ◎ When you carry out commissioning and calibration of the laser output, you must set the laser output at low power level and then gradually...

Open the catalog to page 13