*mydirectindustry

Catalogs
Maxphotonics Co., Ltd
100W-300W Q-switched Fiber Laser V1.1

100W-300W Q-switched Fiber Laser V1.1

Product catalog summary

Preface: This document is a user guide for the Q-Switched Pulsed Fiber Laser (MFP100W-300W) series by Maxphotonics Co., Ltd., emphasizing the importance of understanding operating and maintenance instructions for proper use and safety.

Company Profile: Maxphotonics Co., Ltd., established in 2004, is a leading manufacturer of lasers and related products, holding numerous patents. Their products are used in laser marking, DTS systems, and scientific research.

Chapter 1: Characteristic Explain - The laser series is designed for high efficiency and reliability in marking and engraving, classified as Class 4 laser products, requiring strict adherence to safety guidelines.

Chapter 2: General Safety Information - Outlines safety conventions, laser protection requirements, and general safety instructions, emphasizing the use of laser safety eyewear and specific procedures to avoid hazards.

Chapter 3: Product Description - Provides an overview of the product's properties, model designation codes, and certifications.

Chapter 4: Specification - Details the optical and general characteristic parameters of the laser, including its structural layout.

Chapter 5: Operation Guide - Offers instructions on electrical power connection, control connector pin assignment, and laser operation using a digital interface.

Chapter 6: Common Fault Treatment - Discusses troubleshooting for issues such as laser emission failure and power drops.

Chapter 7: Service and Maintenance - Provides maintenance notes and service statements to ensure the longevity and proper functioning of the laser.

Chapter 8: Warranty Statements - Outlines general warranty items and limitations.

Key Safety Information: Emphasizes wearing laser safety eyewear, avoiding direct exposure to the laser beam, and ensuring proper grounding of the equipment. Unauthorized disassembly voids the warranty.

Main Features:

Short optical pulses with high peak power and a wide range of pulse repetition rates (PRR).
Superior reliability and long lifetime.
No shadow or virtual open circuit phenomenon when processing special materials.
Universal DB-25 interface.

Applications:

Industrial applications.
Scientific research.

Product Description:

Maxphotonics certifies that the equipment is tested and meets specifications before shipping. Check for damage upon receipt and contact Maxphotonics if any is found.
Model Designation Codes: MFP-100W, MFP-200W, MFP-300W for different power levels.

Specifications:

Optical Characteristics: Includes parameters like mode, polarization, beam quality, center wavelength, spectrum width, average optical power, power range, single pulse energy, optical pulse width, PRF, full-power frequency, and output power stability.
General Characteristics: Operating environment temperature, storage temperature, cooling method, warm-up time, operating environment humidity, dimensions, weight, power supply, power consumption, beam diameter, beam ellipticity, delivery cable length, laser startup and shutdown times.
Structural Layout: Dimensions for 100W and 200-300W laser modules and standard isolated output head.

Operation Guide:

Includes a packing list and cautions for handling and connecting the laser.
Electrical power connection and control connector pin assignment for DB-25 plug are detailed.
Digital control interface description and operation steps for using the laser via digital interface.
Operation features include PRR adjustments, power setting changes, and temperature-related automatic shutdowns.

Common Fault Treatment:

Guidance on troubleshooting laser emission failures and power drops, including checking connections, power supply, and signals.

Service and Maintenance:

Maintenance notes emphasize no operator serviceable parts and the need for qualified personnel for repairs.
Service statements provide guidance on contacting customer service and returning products for troubleshooting.

Warranty Statements:

General warranty covers defects caused by material and production technology within the agreed period.
Warranty limitations include tampering, misuse, operation beyond specifications, and improper installation or maintenance.

Catalog excerpts

Q-SWITCHED PULSED FIBER LASER(MFP100W-300W) Maxphotonics Co.,Ltd.

Open the catalog to page 1

Copyright © Maxphotonics Co., Ltd (hereafter referred to as Maxphotonics). All rights reserved. You may not copy, modify, transmit or publish this publication, in any form, in any media or by any means, without the prior written permission of Maxphotonics, except as allowed under applicable copyright laws. Permitted copies shall bear the same copyright and proprietary notices that were contained on the original version. All information contained in this document is subject to change and revision without notice. Maxphotonics believes that the information provided is accurate and reliable; however...

Open the catalog to page 2

Thank you for using the Q-Switched Pulsed Fiber Laser (MFP100W-300W) Series products from Maxphotonics. We compile this document for you in order that the laser is used and maintained properly. Due to the limited level of the translaters, coupled with time constraints, there are some careless mistakes in this document, and your understanding will be much appreciated. Thank you again for using Maxphotonics' products. Please take time to read and understand this User’s Guide and familiarize yourself with the operating and maintenance instructions before you use the product. We recommend that the...

Open the catalog to page 3

Company Profile As a large laser manufacturer founded in 2004, Maxphotonics Co., Ltd. specializes in research and development, production and sales of lasers and ancillary products. Maxphotonics owns a number of independent intellectual property rights and patents as well as high-power pulsed fiber laser, high-power fiber laser and high-power fiber amplifier etc. So far, with intellectual property rights and patents, Maxphotonics owns industrial pulsed fiber laser series, fiber laser for scientific researches, tunable fiber laser, fiber amplifier, ASE light source, etc. Those products are widely...

Open the catalog to page 4

Company Profile… ……………………………………………………………… 2 Chapter 1 Characteristic Explain… ……………………………………… 5 Chapter 2 General Safety Information… ……………………………… 6 1-Safety Conventions…………………………………………………………… 6 2-Laser Protection… …………………………………………………………… 7 3-General Safety Instructions………………………………………………… 7 4-Additional Safety Information… …………………………………………… 12 Chapter 3 Product Description… ………………………………………… 13 1-Pr

Open the catalog to page 5

3-Structural Layout……………………………………………………………… 17 Chapter 5 Operation Guide… ……………………………………………… 20 1-Electrical Power Connection… …………………………………………… 20 2-Control Connector Pin Assignment, DB-25 plug……………………… 21 3-Laser Operation Using Digital Interface… ……………………………… 26 Chapter 6 Common Fault Treatment… ………………………………… 28 1-Laser Emission Failure… …………………………………………………… 28 2-Power Drops…………………………………………………………………… 28 Ch

Open the catalog to page 6

Chapter 1 Characteristic Explain The Q-Switched Pulsed Fiber Laser (MFP100W-300W) Series products provide a wide range of lasers, the emission wavelength of which is centered at 1060nm. They are air-cooled and maintenance-free and deliver high efficiency, high reliability, and high performance on marking and engraving, which makes them ideal tools in this area. Maxphotonics' Q-Switched Pulsed Fiber Laser (MFP100W-300W) Series are Class 4 laser products and are designed and tested with safety. By following this User Guide and applying sound laser safety practices, it will be a safe and reliable...

Open the catalog to page 7

All safety warning symbols during operating process of the laser include:

Open the catalog to page 8

Chapter 2 General Safety Information NOTE : ◎ This device is classified as a high power Class IV laser instrument. It may emit up to 300W average power near 1060nm wavelength. This level of light may cause damage to the eye and skin. Despite the radiation being invisible, the beam may cause irreversible damage to the retina. Laser safety eyewear is not provided with this instrument, but must be worn at all times while the laser is operational. Use appropriate laser safety eyewear when operating this device. The manufacturer of the laser system is responsible for the safety compliance according...

Open the catalog to page 9