*mydirectindustry

ROB 8-37

1 / 2 PagesView full catalog

ROB 8-37

Product catalog summary

Technical Specifications:

Air Drive Pressure: 1-10 bar / 14.5-145 psi
Max. Outlet Pressure: 300 bar / 4,350 psi
Pressure Ratio: 1:8 / 1:37
Displacement Volume/Double Stroke: 21.6 cm³ / 1.3 cu.inch
Connections: Inlet and Outlet: 1/4 BSP, Air Drive: 3/8 BSP
Max Operating Temperature: 60°C
Net Weight: Approx. 7 kg
Inlet Pressure (Min/Max): 10-20 bar / 145-290 psi
Average Flow: 30 NL/min (dependent on air drive and inlet pressure)
Wetted Materials: Seal Package: Filled Teflon (PTFE), Fluorcarbon (V); High Pressure Body: 1.4404; Piston: 1.4112; Fittings: 1.4571
Dimensions: Height: 200 mm, Depth: 116 mm, Width: 116 mm

Available Accessories:

Air control units type C1 with filter pressure regulator, control pressure gauge, and shut-off valve.
Safety valve option (C1/SV) to protect against excessive outlet pressures.

Performance Data:

Filling time for a 3-liter bottle varies with inlet and outlet pressures. For example, at 10 bar inlet pressure, filling times range from 60 seconds at 25 bar outlet pressure to 1135 seconds at 200 bar outlet pressure.
At 20 bar inlet pressure, filling times range from 10 seconds at 25 bar outlet pressure to 920 seconds at 200 bar outlet pressure.

Additional Notes:

All technical and dimensional information is subject to change.
General Terms and Conditions of sale, including limitations of liability, apply to all products and services sold.

Catalog excerpts

Technical Data Sheet Rebreather Oxygen Booster Technical Data: Air drive pressure: Pressure ratio: Displacement volume/double stroke Connections Inlet: Outlet: Standard: Side inlet 1/4 BSP 1/4 BSP Maximum operating tempreature Inlet Pressure (min./max.) Average Flow* * The flow is depending on air drive and inlet pressure double acting, single air drive head and distance piece Wetted materials of construction: Seal package: Filled Teflon (PTFE) Fluorcarbon (V) High Pressure Body: Side inlet Approximate Dimensions: Available Accessories Air control units type C1 with filter pressure regulator, control pressure ROB 8-37 with C1 gauge and shut off valve: To protect the booster against excessive outlet pressures or to limit the ROB 8-37 with C1/SV air (The required outlet pressure has to be outlet pressure, a safety valve can be fitted to the air control unit in the air indicated.) drive line: Please consult factory for more information. All technical and dimensional information subject to change. All General Terms and Conditions of sale, including limitations of our liability, apply to all products and services sold. MAXIMATOR Technical Data Sheet ROB 8-37

Open the catalog to page 1