Installation and operating manual Air amplifier - MPLV4, MPLV7, SPLV3, SPLV10, GPLV5
52Pages

Maximum Pressure. Installation and operating manual

Key information! Follow the manual for safe and proper use. Keep the manual near the machine for later reference. MAXIMATOR GmbH Lange Straße 6 99734 Nordhausen Germany Phone: +49 3631 9533-0 e-mail: info@maximator.de Internet: www.maximator.de Warranty and liability: As a general rule, the “General Terms and Conditions” of Maximator GmbH shall apply. These terms and conditions are available at http://www.maximator.de. Warranty and liability claims shall not be accepted if they can be attributed to one or more of the causes mentioned in this manual or explicitly stipulated below: – – – – –...

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information regarding this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rating plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List of abbreviations and formula signs used . . . . . . . ....

Prerequisites for installation . . . . . . . . . . Air amplifier installation . . . . . . . . . . . . . Installation of connecting lines. . . . . . . . . Connecting the drive air . . . . . . . . . . . . . Control air connection . . . . . . . . . . . . . . . Connecting the inlet line and outlet line . . Connecting a separate bleed pipe . . . . . . Exhaust silencer installation . . . . . . . . . . . Commissioning . . . . . . . . . . . . . . . . . . . . Prerequisites for commissioning . . . . . . . Commissioning . . . . . . . . . . . . . . . . . . . . Prerequisites for operation . . . . . . ....

Prerequisites for removal and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Temperature class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation and maintenance . . . . . . . . . . . ....

General information Information regarding this manual The pneumatically driven air amplifier manufactured by MAXIMATOR is a selfcontrolling, oscillating pressure booster and is used for transporting and compressing pressurised air and nitrogen. These instructions are applicable for the air amplifier models MPLV4, MPLV7, SPLV3, SPLV10 and GPLV5 (only referred to as "compressor" in other sections and chapters) and with a serial number of greater than 23000001. The general drawing supplied along the models is an integral component of these instructions and must be kept in safe custody along...

Rating plate The rating plate is located on the pneumatic cylinder of the compressor and contains the following information:1: 1 Max. permitted operating pressure 2 Air amplifier 3 Type (specifications from the order code) 4 Maximum drive pressure 5 Minimum inlet pressure 6 Calendar week/year of manufac ture 7 Article number 8 Serial number 9 Gear ratio 10 Manufacturer contact information 11 Label according to applied guidelines 12 Operating temperature range 1 Individual compressors may have different rating plates, e.g. metal ones

Explanation of symbols DANGER This combination of symbol and signal word indicates a hazardous situation which - if not avoided - may lead to severe injuries or death. WARNING This combination of symbol and signal word indicates a potentially hazardous situation which - if not avoided - may lead to severe injuries or death. CAUTION This combination of symbol and signal word indicates a potentially hazardous situation which - if not avoided - may lead to light or minor injuries. NOTICE This combination of symbol and signal word indicates a potentially hazardous situation which - if not...

List of abbreviations and formula signs used Abbreviation

Qualification of the personnel Only qualified personnel who are specialised and have been trained to do so must work on the air amplifier. Allowing unqualified personnel to work on the compressor or enter the danger zone creates hazards which could lead to death, severe injuries and significant property damage.

Safety and protection measures The following sections stipulate the residual risks associated with the product, even when used as intended. In order to reduce the risk of personal injuries and material damage, and to prevent hazardous situations, you must observe the safety information listed in this section and the warnings in all other sections of this manual. Personal protective equipment Personal protective equipment (in other sections also referred to as PPE) protects personnel from occupational safety and health hazards while at work. Wearing personal protective equipment may be...

During assessment, check the following leak points: Tab. 2-2 leak point danger zone The hazards are primarily due to the high pressure and extreme temperatures of the conveyed fluid and/or the hazardous substances used. The system designer must determine detailed danger zones as part of his job and can use his special knowledge of high-pressure technology and the hazardous substances used in each case.

Safety and protection measures 2.4 Non obvious hazards Using asphyxiant operating fluids can lead to severe injuries or death by asphyxiation. Assess the risk for the equipment in the risk assessment. The following are some potential corrective actions: – – – – Operate the compressor in an adequately ventilated space. Check the compressor for leaks on a regular basis. Ensure that lines are connected in such a way as to remain leak-tight for a long time. If necessary, use connecting lines to remove the escaping operating fluids. Assess the risk for the equipment in the risk assessment....