Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs MAX4012/MAX4016/MAX4018/MAX4020
17Pages
Catalog excerpts
General Description The MAX4012 single, MAX4016 dual, MAX4018 triple, and MAX4020 quad op amps are unity-gain-stable devices that combine high-speed performance with Railto- Rail outputs. The MAX4018 has a disable feature that reduces power-supply current to 400ìA and places its outputs into a high-impedance state. These devices operate from a 3.3V to 10V single supply or from ±1.65V to ±5V dual supplies. The common-mode input voltage range extends beyond the negative power-supply rail (ground in single-supply applications). These devices require only 5.5mA of quiescent supply current while achieving a 200MHz -3dB bandwidth and a 600V/ìs slew rate. These parts are an excellent solution in low-power/low-voltage systems that require wide bandwidth, such as video, communications, and instrumentation. In addition, when disabled, their high-output impedance makes them ideal for multiplexing applications. The MAX4012 comes in a miniature 5-pin SOT23 and 8- pin SO package, while the MAX4016 comes in 8-pin ìMAX® and SO packages. The MAX4018/MAX4020 are available in a space-saving 16-pin QSOP, as well as a 14-pin SO. Applications Set-Top Boxes Surveillance Video Systems Battery-Powered Instruments Video Line Driver Analog-to-Digital Converter Interface CCD Imaging Systems Video Routing and Switching Systems ____________________________Features Low-Cost High Speed: 200MHz -3dB Bandwidth (MAX4012) 150MHz -3dB Bandwidth (MAX4016/MAX4018/MAX4020) 30MHz 0.1dB Gain Flatness 600V/ìs Slew Rate Single 3.3V/5.0V Operation Rail-to-Rail Outputs Input Common-Mode Range Extends Beyond VEE Low Differential Gain/Phase: 0.02%/0.02° Low Distortion at 5MHz: -78dBc SFDR -75dB Total Harmonic Distortion High-Output Drive: ±120mA 400ìA Shutdown Capability (MAX4018) High-Output Impedance in Off State (MAX4018) Space-Saving SOT23, SO, ìMAX, or QSOP Packages MAX4012/MAX4016/MAX4018/MAX4020 Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs ________________________________________________________________ Maxim Integrated Products 1 VEE IN+ IN- OUT 1 5 VCC MAX4012 SOT23-5 TOP VIEW 2 3 4 IN+ OUT VEE N.C. 1 2 8 7 N.C. IN- VCC N.C. SO 3 4 6 5 MAX4012 Pin Configurations RO 50Ù IN VOUT ZO = 50Ù UNITY-GAIN LINE DRIVER (RL = RO + RTO) RF 24Ù RTO 50Ù RTIN 50Ù MAX4012 Typical Operating Circuit 19-1246; Rev 3; 8/04 Ordering Information Ordering Information continued at end of data sheet. Pin Configurations continued at end of data sheet. ìMAX is a registered trademark of Maxim Integrated Products, Inc. PART TEMP RANGE PINPACKAGE MAX4012EUK-T -40°C to +85°C 5 SOT23-5 TOP MARK ABZP MAX4012ESA -40°C to +85°C 8 SO — MAX4016ESA -40°C to +85°C 8 SO — MAX4016EUA -40°C to +85°C 8 ìMAX — For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Open the catalog to page 1MAX4012/MAX4016/MAX4018/MAX4020 Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs _______________________________________________________________________________________ 3 DC ELECTRICAL CHARACTERISTICS (continued) (VCC = 5V, VEE = 0, EN_ = 5V, RL = ‡ to VCC/2, VOUT = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1) VCC = 5V, VEE = 0, VCM = 2.0V VCC = 5V, VEE = -5V, VCM = 0 VCC to VEE CONDITIONS dB 46 57 PSRR Power-Supply Rejection Ratio (Note 3) 54 66 VS 3.15 11.0 V Operating Supply-Voltage Range PARAMETER SYMBOL MIN TYP MAX...
Open the catalog to page 3MAX4012/MAX4016/MAX4018/MAX4020 Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs 4 _______________________________________________________________________________________ Note 1: The MAX4012EUT is 100% production tested at TA = +25°C. Specifications over temperature limits are guaranteed by design. Note 2: Tested with VCM = 2.5V. Note 3: PSR for single 5V supply tested with VEE = 0, VCC = 4.5V to 5.5V; for dual ±5V supply with VEE = -4.5V to -5.5V, VCC = 4.5V to 5.5V; and for single 3.3V supply with VEE = 0, VCC = 3.15V to 3.45V. Note 4: Does not include the external...
Open the catalog to page 4MAX4012/MAX4016/MAX4018/MAX4020 Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs _______________________________________________________________________________________ 7 IN (50mV/ div) OUT (25mV/ div) VOLTAGE SMALL-SIGNAL PULSE RESPONSE (AVCL = 1) MAX4012-19 20ns/div VCM = 2.5V, RL = 100Ù to GROUND IN (25mV/ div) OUT (25mV/ div) VOLTAGE SMALL-SIGNAL PULSE RESPONSE (AVCL = 2) MAX4012-20 20ns/div VCM = 1.25V, RL = 100Ù to GROUND IN (50mV/ div) OUT (25mV/ div) VOLTAGE SMALL-SIGNAL PULSE RESPONSE (CL = 5pF, AVCL = 1) MAX4012-21 20ns/div VCM = 1.75V, RL = 100Ù to GROUND IN...
Open the catalog to page 7MAX4012/MAX4016/MAX4018/MAX4020 Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs _______________________________________________________________________________________ 9 Pin Description PIN MAX4012 MAX4012 MAX4018 MAX4020 SO-8 SOT23 MAX4016 SO/ìMAX SO QSOP SO QSOP NAME FUNCTION 1, 5, 8 — — — 8, 9 — 8, 9 N.C. No Connection. Not internally connected. Tie to ground or leave open. 6 1 — — — — — OUT Amplifier Output 4 2 4 11 13 11 13 VEE Negative Power Supply or Ground (in singlesupply operation) 3 3 — — — — — IN+ Noninverting Input 2 4 — — — — — IN- Inverting Input 7 5 8 4...
Open the catalog to page 9MAX4012/MAX4016/MAX4018/MAX4020 Detailed Description The MAX4012/MAX4016/MAX4018/MAX4020 are single- supply, rail-to-rail, voltage-feedback amplifiers that employ current-feedback techniques to achieve 600V/ìs slew rates and 200MHz bandwidths. Excellent harmonic distortion and differential gain/phase performance make these amplifiers an ideal choice for a wide variety of video and RF signal-processing applications. The output voltage swing comes to within 50mV of each supply rail. Local feedback around the output stage assures low open-loop output impedance to reduce gain sensitivity to...
Open the catalog to page 10All Maxim Integrated catalogs and technical brochures
-
MAX86150
49 Pages
-
MAX30208
29 Pages
-
MAX30205
15 Pages
-
MAX17548
28 Pages
-
MAX17521
22 Pages
-
MAX17550
21 Pages
-
MAX17761
17 Pages
-
MAX25615
9 Pages
-
IO-Link Device Transceiver
41 Pages
-
Digital Video Brochure
4 Pages
-
Clocks Brochure
8 Pages
-
ADC Converters Brochure
7 Pages
-
Automotive Product Guide
32 Pages
-
MAX98304 Mono 3.2W Class D Amplifier
12 Pages
Archived catalogs
-
High-Precision Coulomb Counter
16 Pages
-
Stand-Alone Fuel Gauge
29 Pages
-
I²C to 1-Wire® bridge device
21 Pages
-
1-Wire Device Evaluation Kit
8 Pages