Group: KEMAI MACHINERY & EQUIPMENT CO.,LTD
Catalog excerpts
OOLS CK T L RO XDRIL MA Self‐drilling Anchor [键入文档副标题] Administrator OOLS CK T LL RO XDRI MA [选取日期]
Open the catalog to page 1The self‐drilling hollow bar anchor system is comprised of a hollow threaded bar attached with a drill bit that performs drilling, the hollow bar allows air and water to freely pass through the bar during drilling to remove debris, after drilling at the required depth is completed, grout fills the hollow bar through the pressure for their requirement and completely covers the entire bolt Coupler: The couplers can be used to join hollow bars and extend the bolt length, it means the anchor can be elongated with the couplers ...
Open the catalog to page 2OOLS CK T L RO XDRIL MA Aver. Effect. Ultimate load Cross‐sec capacity Area Outer Dia. effective Ext. dia. Inner Dia. Tensile Strength Yield Strength Yield load capacity KN kips KG/M lbs./ft. Anchor Plate
Open the catalog to page 3Weight Kg / Lb. Hardened cross bit for loose to medium dense conditions with small boulders. TC cross bit for soft to medium rock formations Diameter (mm) / inch Key size (mm)/inch Length (mm)/ inch Length (mm)/inch Key size (mm)/ inch Hole diameter (mm) / inch
Open the catalog to page 4Weight Kg / lb. Steel cross bit Hardened steel bit for loose to medium dense ground conditions TC insert bit for soft to medium rock formations OOLS CK T LL RO XDRI MA Bit with thread R32N & R32S & R32L Hardened arched bit for optimized geometry for unconsolidated soil with small boulders TC arched bit for optimized geometry for soft to medium rock formations Hardened button bit for unconsolidated rock with boulders TC insert button bit for medium rock formation Hardened cross cut drill bit, suitable for most applications including narrow bands of soft r
Open the catalog to page 5www.max-drilling.com Length Meter / Feet OOLS CK T L RO XDRIL MA Type Length (mm) / inch Weight Kg / Lb. Key size (mm) / inch Length (mm) / inch Weight Kg / Lb. Dimension (mm) / inch Hole diameter (mm) / inch Weight Kg / Lb.
Open the catalog to page 6Diameter (mm) / inch Key size (mm) / inch Weight Kg / Lb. Length (mm) / inch Dimension (mm) / inch Hole diameter (mm)/ inch
Open the catalog to page 8OOLS CK T LL RO XDRI MA No matter what kinds of soft rock, loose-medium rock, hard rock and any other special formations, just tell us what you need, our special tailored service is waiting for you upon your demand. MAXDRILL ROCK TOOLS CO., LTD KEMAI MACHINERY & EQUIPMENT CO., LTD Add:Room 408, 4/F, Tower A, Chengshi Fangzhou Building, N0. 25, Zunyi Road Guiyang, Guizhou, China Tel: +86-851-88639105/06 Fax: +86-851-88639108 E-mail: office@kemaico.com info@kemaico.com Web: www.max-drilling.com www.kemaico.com www.maxdrill.com.cn
Open the catalog to page 13All MAXDRILL ROCK TOOLS CO. catalogs and technical brochures
-
TAPHOLE DRILL BIT
4 Pages
-
TAPHOLE DRILL ROD
5 Pages
-
Y20 HAND-HELD ROCK DRILL
2 Pages
-
YT28 JACKLEG DRILL
2 Pages
-
BREAKER STEEL
1 Pages
-
12° TAPERED DRILLING TOOLS
6 Pages
-
DOWN THE HOLE BIT
4 Pages
-
6° TAPERED DRILLING TOOLS
6 Pages
-
7° TAPERED DRILLING TOOLS
5 Pages
-
DTH HAMMER
74 Pages
-
Drifting & tunneling
20 Pages
-
TopHammer-drilling-tools
63 Pages
-
integral drill steel
1 Pages
-
6° taper drill rod and bit
2 Pages
-
12 inch DTH hammer and bit
20 Pages
-
10 inch DTH hammer and bit
19 Pages
-
8 inch DTH hammer and bit
22 Pages
-
5 inch DTH hammer and bit
23 Pages
-
3 inch DTH hammer and bit
17 Pages
-
Down the hole drill bit--QL60
22 Pages
-
Rotary and cutting teeth
5 Pages
-
Wear parts
9 Pages
-
Engineering Cutter Tools
13 Pages
-
Concentric
6 Pages
-
Y24 Hand-Held Rock Drill
2 Pages
-
Maxdrill Break steel
1 Pages
-
Maxdrill Hand splitter
2 Pages
-
Maxdrill Plug Hole Rod
1 Pages
-
Maxdrill Rock Drills Y28
3 Pages
-
Maxdrill Rock Drills Y24
3 Pages
-
Maxdrill Rock Drills Y20
3 Pages
-
Maxdrill DTH drill pipes
4 Pages
-
Maxdrill Down The Hole Hammer
54 Pages
-
DTH Drill Pipes
4 Pages
-
Integral Drill Rod
5 Pages