6° taper drill rod and bit

Product catalog summary

Overview: The document is a technical catalogue focused on small hole drilling products, specifically detailing specifications for drilling tools such as button bits, chisel bits, and drill rods.

Specifications: The catalogue provides detailed specifications for various drilling tools. It includes dimensions, angles, and part numbers for button bits and chisel bits. The bits are categorized by size, with dimensions provided in both millimeters and inches. The document specifies the taper angle for the tools, which is 6°.

Drill Rods: The document lists drill rods with their respective lengths in millimeters and feet, along with their part numbers. The rods are available in different lengths ranging from 600 mm to 4000 mm, and the hex shank dimensions are specified as 22 mm and 25 mm with a length of 108 mm.

Key Parameters: The document highlights critical parameters such as the flushing hole dimensions, button sizes, and angles for the bits. The angles are primarily 35° and 40°, which are crucial for the performance of the drilling tools.

Part Numbers: Each tool and component is associated with a specific part number, facilitating easy identification and ordering. The part numbers are systematically organized, reflecting the tool type and specifications.

Conclusion: This catalogue serves as a comprehensive guide for selecting small hole drilling tools, providing essential specifications and part numbers to assist in the procurement and application of these tools in drilling operations.