Specifications:
The document outlines the performance specifications for locking assemblies made of stainless steel. It emphasizes that the listed performances are valid only if both the shaft and hub are made of stainless steel. If different materials are used, the values may not apply, and consultation with the MAV Technical Department is advised.

Performance Parameters:

• Ma: Screws tightening torque
• Mt: Transmissible torque with Fax=0 kN
• Fax: Transmissible axial load with Mt=0 Nm
• Ps: Contact pressure on shaft
• Ph: Contact pressure in hub bore

Dimensions and Performance Data:
The document provides a detailed table listing dimensions, screw sizes, and performance metrics for various locking assembly sizes. Key parameters include:

• Transmissible torque ranging from 290 to 15,520 Nm
• Self-centering and self-locking features
• Single taper design
• Fitting length larger than MAV 1062
• Lubrication with FDA approved food grade oil, class H-1
• Tolerances: shaft h8; hub bore H8
• Shaft and hub bore surface finish between 0.8 ≤ Ra ≤ 3.2 µm

Composition:

• Slotted inner ring with integrated push-off tapped holes
• Slotted outer ring
• Set of socket head cap screws, grade A4-80

Additional Notes:
Information is subject to change without prior notification, and the document is © MAV S.p.A.