Universal tester Model CT 50
1Pages

Universal Tester Model CT 50  Indication Range 0-500 N  Tractive and Compressive Force Measurements General Information: ■ Electronic testing device with digital display for tensile and compressive force measurements ■ Easy to use and space-saving, made for the use in production and test laboratories, suitable for the tensile force measurement of ready-made supply cables with flat plugs, end sleeves and other pressed, crimped soldered, welded glued or comparably connected parts ■ Compressive force measurement, for example insertion and extraction tests. ■ Indication Range: 0-500N, measurement resolution of 0.5N. ■ High measurement accuracy and reproducibility of measurement ■ Readout and operation via resistant touchscreen with dot matrix-LCD-Display. ■ Casing protected against dust. ■ High measurement frequency. ■ Automatic zero point alignment. ■ Tare-compensation. ■ Overload indicator. ■ 2 operating modes: Peak-mode, displaying the highest measured force value of the entire measurement procedure Tracking-mode, displaying the current force value ■ Setup menu for adjustment. ■ Serial interface for measured value output. ■ Loading system with parallel guided load slide; actuation via laterally mounted hand-lever, adjustable in inclination; load slide with guide rail and possible length adjustment. ■ Durable, maintenance-free metal construction. ■ Universal quick-change tool holders Optional Accessories : - Tabletop printer – Software mavDataEX, -mavSTAT light Data transmission cable for printer connection Data transmission cable for computer connection Other supplies from the catalogue upon request Clamping Tools & Holding Fixtures: Clamping cone SG 40, SG 80 Turntable DT 88K Miniature cable tensioner MK-8 Quick action clamps KSH-6, KSP-8 Miniature grips KSEL, FSEL Layered cone KBS for testing cable tie Comb tool KW 1, KW 2 Other tools from the catalogue. Customized tools upon request. Clip gun tester model CGT 50 for testing the tensioning force of cable tie pistols. Technical Data CT 50: Model Designation: Indication range: 0-500 N. Measurement resolution: 0,5 N Relative deviation in measuring area: ≤ ± 0.5 % of value ± 1 digit Casing: Dimensions: Baseplate: W×D×H ca. 130×400×125 mm; Controls: W×D×H ca. 125×105×70 mm; Hand lever: 240 mm, adjustable inclination Weight: around 8 kg. Material: Anodized aluminum Color: Silver-grey Measuring System: Supply Voltage: 12 V DC via an external power supply. Force Transducer: Strain gauge - load cells with integrated 12 bit AD-converter and RS485 bus. Overload protection. Evaluation: Operating modes: Tracking-mode and peak-mode; Measurement frequency: 10000 Hz; Zero point correction; Tarecompensation; Overload indicator; Setup menu for instrument adjustment; Individual output of measured values via serial interface. Display: Backlight LCD-dot matrix-display, 128x64p, 56,3x38,4 mm. LCD update rate: 5 Hz. Input/Handling All inputs and actuations made via infrared-touchscreen. Interface: RS232C 1200 baud, 8 data bits, 1 stop bit, Parity: none; Connector: RJ45 socket (8-pin). MAV PRÜFTECHNIK GmbH D - 12047 Berlin Sanderstr. 28 * Telefon (030) 693 10 53 * Telefax (030) 693 10 69 * eMail: info@mav-germany.de All technical information and specifications are subject to change without prior notice. They represent no promi