Digital Tester Model FT - Touch  Indication Ranges 0-50 N, 0-250 N, 0-500 N, 0-1000 N with hand lever  Tractive and Compressive Force Measurements Technical Data: Model Designation: Indication Range: Resolution: rel. accuracy error : Measurement System: Power supply: FT- Touch 0- 50/250/500/1000 N. 10000 increments, see overview ≤ ± 0,25 % F.S. ± 1 Digit Power supply: external 24 V DC (plug-power supply); Force Transducer: Strain gauge -load cell with integrated 16 Bit AD-converter and configurable micro-controller system. Evaluation: Operating Modes: Rolling Mode and Peak Point Mode; Internal update rate: ca. 10000 Hz; automatic zero correction; Tare compensation up to 25 % of resp. load cell capacity; Optical and acoustic overload indicator; Internal memory for ca. 4000 measurements; real-time clock with date; Setup menu for internal parameter setting and automatic adjustment in several password protected levels; Single and listing printout via RS232 serial port. Display: LED backlight TFT-touchscreen-display, ca. 115×86 mm. LCD update rate: 60 Hz. Operation: All actuations made via touchscreen. FT - Touch with hand lever Serial Port: RS232C (1200-115200 baud, Connector: Sub-D socket (15 pins) and Ethernet interface (RJ45 8 pins) General Information: FT Tester: Capacity: 0- 50/250/500/1000 N. 240mm hand-lever, adjustable inclination. W × D × H: 130 x 400 x 125 mm. ca. 10 kg. Resistant metal construction. silver and blue, anodized. max. 1000 N. Dimensions: Weight: Construction: Color: Capacity: . Characteristics FT Tester: Load slide, hand-lever operated for rapid test sequences, precise linear guidance. Durable, maintenance-free metal construction. Code 5 25 50 100 Optional Accessories: - Tabletop printer, Software mavDataEX, -mavSTATlight Data transmission cable for printer connection Data transmission cable for computer connection Other supplies from the catalogue upon request Clamping Tools & Holding Fixtures: Clamping cone SG 40, SG 80 Turntable DT 88K Miniature cable tensioner MK-8 Quick action clamps KSH-6, KSP-8 Miniature grips KSEL, FSEL Layered cone KBS for testing cable tie Comb tools KW 1, KW 2 For other tools, please see the catalogue. Customized tools upon request. Clip gun tester model CGT 50 for testing the tensioning force of cable tie pistols. MAV PRÜFTECHNIK GmbH D - 12047 Berlin Sanderstr. 28 * Telefon (030) 693 10 53 * Telefax (030) 693 10 69 * eMail: [email protected] All technical information and specifications are subject to change without prior notice. They represent no promise of characteristics. Modifications are