CGT 50 Touch
2Pages

Clip Gun Tester Model CGT 50 - Touch  Indication Range 0-500 N  Testing Cable Tie Application Tools General Information: ■ Small, handy electronic testing device used to determine the tensile force of cable tie tighten pistols; display and operation via 5.7“ QVGA TFT-touchscreen display. ■ Easy to use and versatile testing device with minimum space requirements, for the use in production or test laboratory, suitable for tensile force measurements of all hand- or pneumatically operated cable tie pistols. ■ Indication Range: 0-500 N, measurement resolution of 0.05 N (other ranges 50/250/1000 N upon request). ■ High measurement accuracy and reproducibility of measurement results. ■ Casing protected against dust. ■ High measuring frequency of 10000Hz. ■ Automatic zero point correction. ■ Tare compensation. ■ Overload indicator. ■ 2 operating modes: - Peak-mode, displaying the highest measured force value of the entire measurement procedure. - Tracking-mode, displaying the current force value. ■ Setup menu for adjustment. ■ Serial interface for measured value output. ■ The CGT 50 is only suitable for testing cable tie tighten pistols. ■ Durable, maintenance-free all metal construction. ■ Universal quick action clamps for the fixture of different kinds of cable tie pistols and manufacturers (for example HellermannTyton, Panduit and others). ■ Different mandrel tools for clamping the cable tie are deliverable. ■ Our electromotive ETM test stations are deliverable with the technical equipment for an automatic test procedure, allowing the actuating lever of the pneumatic clip gun to be triggered with preselected speed. Clip Gun Tester CGT 50 with KBP toolset and HellermannTyton cable tie tighten pistol MK 7 MAV PRÜFTECHNIK GmbH D - 12047 Berlin Sanderstr. 28 * Telefon (030) 693 10 53 * Telefax (030) 693 10 69 * eMail: info@mav-germany.de All technical information and specifications are subject to change without prior notice. They represent no promise of charac

Clip Gun Tester Model CGT 50 - Touch  Technical Data  Supplies  Electromotive Models upon Request Technical Data: Model Designation: Indication range: 0-500 N. Measurement resolution: 0.05 N Relative deviation in measuring area: ≤ ± 0.25 % of value ± 1 digit Casing: Dimensions: Installation: Weight: Material: Baseplate: W×D×H ca. 130×400×125 mm; Controls: W×D×H ca. 125×105×70 mm; Usable in longitudinal and transverse direction. Around 6 kg. Anodized aluminum, silver-grey. Measuring System: Supply Voltage: 24 V DC via an external power supply. Force Transducer: Strain gauge load cells...