Yoke type surface demagnetizer MM JE AFDT Automatic-Field-Decline-Technology

MAURER Classic + Demagnetizers with automatic field decline function Yoke demagnetizers MM JE165 / 266 / 300 are surface type demagnetizers developed by Maurer Magnetic AG. They can be used either manually or integrated in automated processes. They are powered by mains frequency. The demagnetizer MM JE produces a stray field over the middle of the top panel. The operating area of the stray field of a yoke demagnetizer is more volumious as for example the field produced by a plate demagnetizer. Magnetism of ferromagnetic parts can be removed up to a penetration depth of about 10 mm. Therefore...

Operation and range of application In manual operation slide the part you want to demagnetize directly with a slow and continuous movement over the surface of the demagnetizer. The alternating field reaches it‘s maximum at the center of the plate. Alternatively the parts can be demagnetized by using the field decline function. Put the part in the middle of the top panel an press the pulse button. The alternating decreasing field will demagnetize the part automatically. How to get the best results 1. ove the part slowly and continuously from point M I to O over the surface. 2. everse the part...

Range of operation / duty cycle 0°- 40° C, 100% 0°- 40° C, 100% 0°- 40° C, 100% Manual operation • • • Protection against overheating • • • - Integrated temperature switch - Temperature switch contact can be tapped over a standard M8 sensor socket Magnetizing & Demagnetizing Technology Maurer Magnetic AG Industriestrasse 8 - 10 Tel. +41 44 936 60 40 [email protected] Divide by 1.41 to obtein RMS value Switch of the power supply • Standard • CE compliant • Time to fully decline the field after switch off ~200ms • Fastest clock rate when using the field decline...