prior to parts cleaning Automatic Demagnetizing Constant-Field- Technologyi

Perfect demagnetization for perfect cleanliness Maurer-Degaussing®-Technology Manufacturers of cleaning machines guarantee achieving the specified residual dirt limits of ferromagnetic parts, only up to a defined residual magnetism level. This requires a powerful and stable demagnetizing process. Especially for this OEM-segment, Maurer Magnetic AG offers the new MM DN + SE demagnetizer. The power is designed to meet current requirements defined by the fine- and ultra-fine cleaning machine manufacturers (residual magnetism < 2A/cm at a Hall effect zone distance of ~2mm to the surface of the part)....

Demagnetization prior to industrial cleaning processes Residual magnetism in a part causes attractive forces on ferromagnetic dirt particles. The particles stick on the surface of the part. This magnetic forces increase near to the surface, therefore even modern cleaning systems can‘t remove the dirt particles completely from the part. A safe process can only be reached by a proper demagnetization of the parts prior to the cleaning system. Suitable for bulk material or oriented parts Demagnetizing with MM DN + SE offers you: • No sticking of ferromagnetical particles • Cleanliness after the cleaning...

Coil module Active opening W  ×  H  ×  T [mm] Maximum field peak Maximum pulse rate by maximum field strength: 1 Puls / 40 s Frequency of demagnetization : 8 – 20 Hz (with default factory setting) Configuration: screwed Coil module in MM SE33 Helmholtz configuration Active opening W  ×  H  ×  T [mm] Maximum field peak Maximum pulse rate by maximum field strength: 1 Puls / 40 s Frequency of demagnetization : 8 – 20 Hz Protection class IP: 54 (with default factory setting) Power module MM DN1100 SE3, SE4, SE33, SE44 Dimensions W  ×  H  ×  T [mm] Configuration: screwed Power supply rating Protection...