Signal Analyzer Software vAnalyzer  In the vAnalyzer software, the settings for data acquisition, analysis functions and the displays can be set. From the measurement data, a large number of functions can be calculated and displayed:  Time weighted/unweighted  Time KB-weighted  RMS and Max/Min values  FFT spectra  Auto spectra  Cross spectra  FRF H1, H2, H3  Coherence  Cepstrum  Hilbert  RMS/Peak  Etc. FFT-Analyzer  Auto spectra  Cross spectra  FRF (H1,2,3)  Coherence  Etc. Data Recorder  RMS Historiy  Triggered Recordings Free vAnalyzer Viewer All display settings can be stored in files and easily accessed with a mouse click. Hardware The "universal interface" of the vAnalyzer makes it possible to use different data acquisition systems. Depending on the application, different hardware configurations are available MAUL-THEET GmbH Bülowstrasse 66 D-10783 Berlin tel: 0049 (

Settings The following settings:  Input channels: Voltage range, AC, DC oder IEPE,  Analyzer: Frequenc range, -resolution, FFT Window function  Trigger: Level, Slope, Pre-and Post Trigger can be set in clear dialogs and saved in profiles. Sensor database The vAnalyzer has a sensor database that can be adjusted by the user. The sensors can be assigned to the measurement channels using a drag-and-drop function. Generator With the generator module, the following signals can be generated and output as analog:  Sine  Noise  Chirp  Step Sine. Data recorder An important module of the vAnalyzer...