ON-SITE MACHINING ON-SITE FLANGE FACING PORTABLE FLANGE FACING MACHINES ■ 1"-80" MANUAL FLANGE FACING MACHINE ORBITRUE 19 MANUAL Re-faces flange sealing faces from 1" to 19" directly on the plant, with no motor and no power supply. ORBITRUE 19 Manual clamps in the flange bore with its jaw chuck, which becomes the axis of rotation. The operator turns the arm by hand while the lead screw feeds the tool slide: at every revolution the insert removes a spiral of material and leaves the continuous spiral finish required on sealing faces. ■ Internal mounting (ID mount) ■ Continuous spiral finish ■ Facing range 1"-19" ■ Indexable insert ■ Lead-screw feed ■ Fits in a carrying case | TECHNICAL SPECIFICATIONS by drive SPECIFICATION The jaw chuck clamps in flange bores from 0 25 to 152 mm and acts as the axis of rotation: no external brackets, no reference to build. With a constant feed the insert leaves the spiral (“phonographic”) finish required on gasketed sealing faces. SUPPLIED WITH Carrying case • Operating and maintenance manual • Manufacturer’s declaration • Test certificate (Certificate of Trueness) OIL & GAS AND PETROCHEMICAL • POWER AND PROCESS • MARINE AND OFFSHORE • MAINTENANCE AND SERVICE • sealing-face facing • continuous spiral finish • line flanges • valves • nozzles | ORBITRUE RANGE 19 Manual • Tell us the flange diameter, material and position: we reply with configuration, availability and a quotation. The model number is the maximum facing diameter in inches. Data refer to the standard configuration and may change without notice; for out-of-range flanges, ask our engineering team to check your application. MAUCOTOOLS S.R.L. • 88044 Marcellinara (CZ) • Italy