cad

MINAS-BL KV Series
52Pages

{{requestButtons}}

Catalog excerpts

MINAS-BL KV Series - 1

Safety Precautions • Important Notes on exporting this product or equipment containing this product; If the end-user or application of this product is related to military affairs or weapons, its export may be controlled by “Foreign Exchange and Foreign Trade Control Law” of Japan where export license will be required before product can be exported from Japan. • This product is designed and manufactured for use in General Purpose Industrial Equipment and it is not intended to be used in equipment or system that may cause personal injury or death. • All servicing such as installation, wiring, operation, maintenance and etc., should be performed by qualified personnel only. • Tighten mounting screws with an adequate torque by taking into consideration strength of the screws and the characteristics of material to which the product will be mounted. Over tightening can damage the screw and/or material; under tightening can result in loosening. *Example: apply 2.7 N-m - 3.3 N-m torque when tightening steel screw (M5) to steel surface. • Install safety equipment to prevent serious accidents or loss that is expected in case of failure of this product. • Consult us before using this product under such special conditions and environments as nuclear energy control, aerospace, transportation, medical equipment, various safety equipments or equipments which require a lesser air contamination. • We have been making the best effort to ensure the highest quality of our products, however, some applications with exceptionally large external noise disturbance and static electricity, or failure in input power, wiring and components may result in unexpected action. It is highly recommended that you make a fail-safe design and secure the safety in the operative range. • If the motor shaft is not electrically grounded, it may cause an electrolytic corrosion to the bearing, depending on the condition of the machine and its mounting environment, and may result in the bearing noise. Checking and verification by customer is required. • Failure of this product depending on its content may generate smoke of about one cigarette. Take this into consideration when the application of the machine is clean room related. • Please be careful when using the product in an environment with high concentrations of sulfur or sulfuric gases, as sulfuration can lead to disconnection from the chip resistor or a poor contact connection. • Do not input a supply voltage which significantly exceeds the rated range to the power supply of this product. Failure to heed this caution may lead to damage of the internal parts, causing smoke and/or fire and other troubles. • The user is responsible for matching between machine and components in terms of configuration, dimensions, life expectancy, characteristics, when installing the machine or changing specification of the machine. The user is also responsible for complying with applicable laws and regulations. • Manufacturer’s warranty will be invalid if the product has been used outside its stated specifications. • Component parts are subject to minor change to improve performance. • Read and observe the instruction manual to ensure correct use of the product. Panasonic Brushless Motor BRUSHLESS MOTOR Panasonic Corporation, Automotive & Industrial Systems Company, Smart Factory Solutions Business Division, Motor Business Unit 1-1 Morofuku 7-chome, Daito, Osaka 574-0044, Japan Tel : +81-72-871-1212 Fax: +81-72-870-3151 The contents of this catalog apply to the products as of April 2015. GV MINAS-BL KV GP series series series This product is for industrial equipment. Don't use this product at general household. Printed colors may be slightly different from the actual products. Specifications and design of the products are subject to change without notice for the product improvement. This product is for industrial equipment. Don't use this product at general household.

Open the catalog to page 1
MINAS-BL KV Series - 2

Compact and high-efficiency brushless motors MINAS-BL High-efficiency energy saving eco-friendly MINAS series* technology adopted more compact and higher-output brushless motors. * MINAS series is a registered trademark for Panasonic AC servo motors. GV series KV series GP series Options Information System configuration/ System configuration diagram 49 Speed Control Type Speed Control Type Position Control Type Typical options

Open the catalog to page 2
MINAS-BL KV Series - 3

Motor Business coexisting Panasonic Corporation, Automotive & Industrial Systems Company, Smart Factory Solutions Business Division,Motor Business Unit promotes preservation of the environment together with industrial activities and aims to “Company Coexisting with Global Environment” Environmental conservation activities in industrial field CO2 Emissions (2009) Environmental conservation activities have been nowadays, and the role of conservation in the Japan Domestic electricity consumption (2005) Source:Motor Business Unit Research (Units: Hundred million kWh) used in factories, motor...

Open the catalog to page 3
MINAS-BL KV Series - 4

Commutation brushless motor with advanced controlling technology features high efficiency and low power loss. In addition, “Split Core Structure” developed for and proven in MINAS series AC servo motors is introduced to these new brushless motors to further reduce their sizes but increase power. These motors promote “three saving” activities — Energy saving, Cost saving and Space saving. MINAS-BL series Provide More Features Speed control QA range OUr/min** Flat torque characteristic 8-speed operation ■ Positioning at 4 points Compatible with international standards Proprietary CS sensor...

Open the catalog to page 4
MINAS-BL KV Series - 5

Speed Control Type GVseries KV Position Control Type •High efficiency brushless motors realize energy saving. •Distinctively controlled CS signal provides smooth operation through sinewave driving. •Compatible with international standards (ce, ul, cccand kc>, and wider power source voltage range. •The digital keypad (sold separately) and setup support software PANATERM for BL (available from our website, free of charge) enable parameter setting and monitoring. •The proprietary CS sensor extends variable speed control range. •Installation compatibility:GV series is compatible with our...

Open the catalog to page 5

All Matsushita Electric Works catalogs and technical brochures

  1. CA RELAYS

    8 Pages

  2. AQ-J RELAYS

    19 Pages

  3. AQ-H RELAYS

    14 Pages

  4. AQ-G RELAYS

    14 Pages

  5. AQ8 RELAYS

    17 Pages

  6. AQ1 RELAYS

    16 Pages

  7. HG-S series

    18 Pages

  8. HE

    6 Pages

  9. SFD-WL3

    2 Pages

  10. SF4D

    42 Pages

  11. ELC500

    8 Pages

  12. GT707

    2 Pages

  13. GT SERIES

    24 Pages

  14. GT32-R

    2 Pages

  15. Shin-G Series

    293 Pages

  16. LP-GS series

    12 Pages

  17. LP-M

    12 Pages

  18. ER-VW

    8 Pages

  19. ER-TF SERIES

    6 Pages

  20. ER-X001

    4 Pages

  21. EWA2

    8 Pages

  22. SF Relays

    4 Pages

  23. EX-L200

    12 Pages

  24. ce_up50_1

    6 Pages

  25. digest_e_cata

    32 Pages

  26. fx-100

    20 Pages

  27. uj30

    12 Pages

  28. KW2G-H

    4 Pages

  29. LP-S series

    12 Pages

  30. LP-S500W

    12 Pages

  31. SC-GU3

    8 Pages

  32. SL-PK01

    2 Pages

  33. FP-X0

    8 Pages

  34. FPOR

    20 Pages

  35. PM 2

    6 Pages

  36. PM-24

    6 Pages

  37. LP-Z Series

    4 Pages

  38. LP-V/W Series

    16 Pages

  39. FP2SH

    24 Pages

  40. LP-300 Series

    12 Pages

  41. SF4B Ver.2

    48 Pages

  42. SL-VGU1-485

    2 Pages

  43. PM-44/PM-54

    10 Pages

  44. PV200

    22 Pages

  45. FX-500

    20 Pages

  46. LP-400 Series

    16 Pages

  47. PM-64

    8 Pages

Archived catalogs

  1. Signal Relays

    31 Pages