Catalogs >
Matsushita Electric Works >
Lighting Control Catalog

Lighting Control Catalog
42Pages

Catalog excerpts

INTERNATIONAL OPERATIONS DEPARTMENTWIRING DEVICES DIVISION Head Office : 1048, Kadoma, Osaka 571-8686, Japan Telephone : (06) 6908-1860 Facsimile : (06) 6908-1864 COPYRIGHT 2007 All Rights Reserved > 200704-5YZ Specifications are subject to change without notice. Printed in Japan size="-1">

Open the catalog to page 1

System Outline System Outline

Open the catalog to page 3

?Dimensions (units: mm) 3.5 740 7.5 Model No.DescriptionRatingRemarks? Signal current: Rated input signal current (Name displayed on units) Symbol indiagram WRT2050-80 Model No.DescriptionRatingRemarks? Signal current: Rated input signal current (Name displayed on units) Symbol indiagram > 60 Lead wire type > AC100V SignalSignalwhite 41 56 WR3400-8 Relay Control T/U (4-Circuit)Signal current1.2 mA Includes signal

Open the catalog to page 15

?Dimensions (units: mm) Model No.DescriptionRatingRemarks? Signal current: Rated input signal current (Name displayed on units) Symbol indiagram Model No.DescriptionRatingRemarks? Signal current: Rated input signal current (Name displayed on units) Symbol indiagram (Single pole) WR3416-8 (Single pole) Output side:20 A 300V AC Input side:0.35 A 24V AC R-Ry WR6161K-8 Output Contacts 20A 277V/347V ac Input WRT4101-8 UL R-RyD > Applicable to1-GangCOSMOModule plates

Open the catalog to page 16

?Dimensions (units: mm) Model No.DescriptionRatingRemarks Symbol indiagram (Motor Drive T/U) (Motor Control Switch) Model No.DescriptionRatingRemarks? Signal current: Rated input signal current (Name displayed on units)? Signal current: Rated input signal current (Name displayed on units) Symbol indiagram (for 500W) WRT4345-81WRT4345-82 WRT4421-8WRT4422-8 > 2.2 Signal current 8 mAVoltage > outputAC230V N1N2 Signal current: 2.3 mARated voltage: 24V AC (Non-volatile memory used) > WRT43415-81 Rated voltage Rated voltage Rated voltage

Open the catalog to page 17

?Dimensions (units: mm) Red LED off with card inserted WR3891-8 Model No.DescriptionRatingRemarks? Signal current: Rated input signal current (Name displayed on units)? Signal current: Rated input signal current (Name displayed on units) Symbol indiagram WRT3374K-8 > 70 (Ceiling hole dimensions) Model No.DescriptionRatingRemarks Symbol indiagram > 608031 Ceiling C-IFU Passive Infrared Ceiling Unit(Infrared I/O) WRT3394-8 > 9.5 R Not for USA Appellation Indication Unit (Relay Status Indication Type) ?Appellation plate and sheet are included to display the load names.?The lamp is an LED. 83.5...

Open the catalog to page 18

(0ch-1~4,...,63ch-1~4) (0~63ch) (1~4)Channel can be calculated byadding the number on "1" line. > ...setting is required.Note: The same load address cannot be used for Relay Control T/Us and 6A Contact Output T/Us. > 1 2

Open the catalog to page 22

(used for address setting) > Used when performing pattern and group control settings. > Used to move the cursor to the next lineon the panel display. > Used to confirm Switch Function andAddress Number. Used to erase input data. > Used to transmit a Function or an Addressinput on the LCD panel display to a Switchor T/U. > Used to select Switch Function.(Individual, Dimming, Group, or Pattern) > ?Used to transfer the Function or an Address inputs on the LCD panel Used to set Address Numbers. Used to illuminate the LCD Panel for easy Used to clear Address Numbers. Used to choose functions...

Open the catalog to page 23

8 Close the cover of the unit and fasten its screw. > 7 Upon completing the Group Control Program Setting , press the Mode Set Button to change the system into the Normal mode again. 2 In Step 5 both LEDs (Red and Green) lights for the Individual Switches for which a timer duration (Off-delay or On- ON/OFF display "ON":Load included in In step 5 set a Dimmer Switch as follows. 1 Press the Dimmer Switch a and make sure the Red LED lights. > 2 Set a level of illumination using the Switch > jji s (Push to increase brightness and to decrease it.) (Use the six LEDs as a scale to adjust the level...

Open the catalog to page 26