Catalog excerpts
![FX-500 - 1](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_1m.jpg)
ideas for life DIGITAL FIBER SENSOR Conforming to EMC Directive Listing Certified leading edge FX-SERIES HIGH END MODEL
Open the catalog to page 1![FX-500 - 2](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_2m.jpg)
CONCEPT Industry leading stability Decrease the variation among fiber sensors High stability! “Why are the values different even for the same detection?” “If we try to forcibly unify all the display values of incident light intensity, we will not be able to read the actual changes.” SUNX focuses on the variation among fiber sensors and aims for absolute digitalization. When the FX-500 series is used together with our super quality fiber, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models. By being close to absolute values instead of...
Open the catalog to page 2![FX-500 - 3](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_3m.jpg)
“Stabilized incident light intensities” even in multiple units CONCEPT “Super quality fiber” with stable emission amount A quality that surpassed standard fiber Introducing super quality fiber New fibers developed using a new manufacturing method adopted by our own factory along with a persistent quality control system The basic performance of a standard fiber is greatly enhanced! Variation in emission intensity of the fiber core is controlled down to less than ±10 %, achieving a stable detection. ø2.2 mm ø0.087 in standard fiber Previous ± 10 New material Stable emission intensity Single...
Open the catalog to page 3![FX-500 - 4](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_4m.jpg)
CONCEPT Industry leading sensing performance Ultra high-speed & Ultra long range detection The exclusive detection IC combined with the high intensity beam emitted from the active coupling emission device provides the capability of offering high-speed response time over a longer sensing range, opening up new possibilities for fiber sensor detection. Max. 25 μs response time FX-500 with its ultra high response time improves productivity. Performing minute object detection when using a small diameter fiber is now possible with a high response time and longer sensing range. Hyper HYPR mode...
Open the catalog to page 4![FX-500 - 5](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_5m.jpg)
CONCEPT Sharp detection with suppressed hysteresis A different accuracy! FX-500 with its accurate detection catches fractional difference in light intensity, fulfilling high precision and low-hysteresis applications. Retroreflective type fiber H-02 mode Long range detection of small objects with small difference in light intensity FX-500 series achieves a long sensing range by its suppressed hysteresis and high intensity beam. Detection of minute objects over a long range is now more accurate compared to the past. Optimal sensing region Short Sensing renge Long Comparison image of optimal...
Open the catalog to page 5![FX-500 - 6](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_6m.jpg)
OPERATION Class leading form and operability New form! Pr ev iou ss pa ce Flat display with wide viewing angle The large and high-contrast 7-segment display of high luminance provides clear visibility from a wide angle of view. Compact cover does not get in the way Reduced to 1/3 of that of previous Clearly visible even from sideways R23 mm R0.906 in Streamlined fiber clutch MODE NAVI + Direct setting While the conventional fiber installation is done after opening up the cover, the FX-500 series adopts a guard structure, eliminating the cover so that the fiber installation can be done in...
Open the catalog to page 6![FX-500 - 7](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_7m.jpg)
FUNCTION A variety of functions at the industry’s leading edge Resolves variation in incident light intensity display Display adjustment setting Display adjustment setting Even if there is no problem in detection, the variation in display may make it difficult for an operator to verify proper operation. By using the display adjustment setting, random values can be adjusted, and the visual variation can be resolved to help define proper operation in an operation manual. Variation in incident light intensity Stable detection over long and short periods Stable sensing comparison Stabilized...
Open the catalog to page 7![FX-500 - 8](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_8m.jpg)
FUNCTION A variety of functions at the industry’s leading edge Stable detection while being eco-friendly Emission power & gain setting For cases when the incident light intensity saturates the receiver, the light intensity can be attenuated to the optimal level by AUTO without changing the response time. This allows for stable detection while maintaining an optimal S/N ratio and saves energy by controlling the emitting electric current. Detecting a transparent sheet AUTO Normal Object present Object absent Saturated Auto mode (AUTO) and 3-level manual mode (3 levels: H / M / L [adjustable])...
Open the catalog to page 8![FX-500 - 9](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_9m.jpg)
FUNCTION Selectable interference prevention In addition to the automatic interference prevention function which is enabled through the optical communication of cascade connected amplifiers, an alternate frequency interference prevention function is also incorporated. So even for layouts where optical communication cannot be carried out, switching of emission frequencies allows interference prevention. Alternate frequency interference prevention Automatic interference prevention An optical communication function allows sensors to be adjusted simultaneously The optical communication function...
Open the catalog to page 9![FX-500 - 10](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_10m.jpg)
FX-500 ORDER GUIDE Amplifiers Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately. Type Appearance Emitting element Model No. Output 2-output type NPN open-collector transistor FX-501P Standard type FX-501 External input PNP open-collector transistor – FX-502 NPN open-collector transistor 2 outputs Red LED PNP open-collector transistor 2 outputs FX-505-C2 NPN open-collector transistor 2 outputs analog output FX-505P-C2 Cable type FX-502P PNP open-collector transistor 2 outputs analog output Incorporated (Switchable with Output 2) Incorporated...
Open the catalog to page 10![FX-500 - 11](https://img.directindustry.com/pdf/repository_di/15605/fx-500-308071_11m.jpg)
FX-500 SPECIFICATIONS Model No. Type Item Standard type 2-output type Cable type NPN output FX-501 FX-502 FX-505-C2 PNP output FX-501P FX-502P FX-505P-C2 Supply voltage 12 to 24 V DC +10 –15 % Ripple P-P 10 % or less Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type) Output (2-output type and cable type: Output 1, Output 2) NPN open-collector transistor PNP open-collector...
Open the catalog to page 11All Matsushita Electric Works catalogs and technical brochures
-
Narrow pitch RF connectors
12 Pages
-
High Current Connectors
12 Pages
-
Ultra-slim Photoelectric Sensor
16 Pages
-
Laser Distance Sensor
16 Pages
-
CA RELAYS
8 Pages
-
AQ-J RELAYS
19 Pages
-
AQ-H RELAYS
14 Pages
-
AQ-G RELAYS
14 Pages
-
AQ-A RELAYS (DC output type)
15 Pages
-
AQ-A RELAYS (AC output type)
17 Pages
-
AQ8 RELAYS
17 Pages
-
AQ1 RELAYS
16 Pages
-
HG-S series
18 Pages
-
HE
6 Pages
-
SFD-WL3
2 Pages
-
SF4D
42 Pages
-
ELC500
8 Pages
-
AC Fan Motor 80×38t
1 Pages
-
GT707
2 Pages
-
GT SERIES
24 Pages
-
GT32-R
2 Pages
-
Shin-G Series
293 Pages
-
MINAS-BL KV Series
52 Pages
-
LP-GS series
12 Pages
-
LP- V SERIES, LP- W SERIES
16 Pages
-
LP-M
12 Pages
-
ER-VW
8 Pages
-
ER-TF SERIES
6 Pages
-
ER-X001
4 Pages
-
EWA2
8 Pages
-
RJ RELAYS (ARJ)
5 Pages
-
SF Relays
4 Pages
-
mechDE Relays (ADE)
4 Pages
-
EX-L200
12 Pages
-
gtseries_e_cata
24 Pages
-
ce_up50_1
6 Pages
-
digest_e_cata
32 Pages
-
fx-100
20 Pages
-
uj30
12 Pages
-
Power relay selector chart
8 Pages
-
NEW & KEY PRODUCTS 2012
32 Pages
-
Aicure UJ30/35 Catalog
12 Pages
-
KW2G-H
4 Pages
-
LP-S series
12 Pages
-
LP-S500W
12 Pages
-
SC-GU3
8 Pages
-
SL-PK01
2 Pages
-
DPC-L100/DPH-L100
12 Pages
-
FP-X0
8 Pages
-
FPOR
20 Pages
-
PM 2
6 Pages
-
PM-24
6 Pages
-
LP-Z Series
4 Pages
-
LP-V/W Series
16 Pages
-
FP2SH
24 Pages
-
LP-300 Series
12 Pages
-
SF4B Ver.2
48 Pages
-
SL-VGU1-485
2 Pages
-
PM-44/PM-54
10 Pages
-
PV200
22 Pages
-
Flat Type Fiber
2 Pages
-
LP-400 Series
16 Pages
-
MIPTEC catalog
8 Pages
-
PM-64
8 Pages
Archived catalogs
-
Lighting Control Catalog
42 Pages
-
Time Switches
2 Pages
-
Time & Synchronization VIC100
1 Pages
-
GPS Products Antennas
2 Pages
-
Phototriac Coupler
4 Pages
-
Signal Relays
31 Pages