Catalog excerpts
Energy Consumption Visualization
Open the catalog to page 1Fiber Sensors Tough Fiber Introducing a tough fiber that transcends common knowledge! Conventional 3 types rolled into 1 !! New standard fiber Reduced variation in sensing Beams at the fiber aperture are uniform, leading to stable sensing. Previous exible ber Flexible fiber Flexible durability million times Previous sharp Generally exible bers and bending ber sharp bending bers are composed of multiple ber cores, often resulting in large variations in light intensity. Tough Fiber Break-free Sharp bending fiber Bending radius Flexible durability Bending conditions Bending radius: R10 mm...
Open the catalog to page 2Fiber Sensors Dual Digital Display Fiber Sensor At the industry’s leading edge A different stability! When used with the super quality fiber as a set, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models. FX-500 series Super quality fiber Threshold value Incident light intensity Digital control is essentially achieved Stability of the incident light intensity is improved by 4 times*. Values of incident light intensity stay close together even after replacing an amplifier. Analog output cable type * Using a small diameter fiber (fiber...
Open the catalog to page 3Fiber Sensors Dual Digital Display Fiber Sensor Taking digital fiber sensors to the next level Space-saving 9 mm in width The unit is a slim 9 mm in width, even with the digital dual screen display. It both saves space and is easy to handle. Incident light intensity Wiring can be carried out using commerciallyavailable connectors The DP-100 series of digital pressure sensors and the PM-64 series of micro photoelectric sensors can be wired using the same commercially-available connectors. Simple operation Setting details are divided into three levels for simple operation, so that settings...
Open the catalog to page 4Simple Wire-saving Units Communication Unit for Open Network The SC-GU3 Series is easy to install and enables flexible remote operation over a network. Sensor information can be checked and changed via an open network. The status of sensors in remote locations can now be checked via an open network. Digital readings are also acquired periodically and displayed in graph form to facilitate preventative maintenance. The ability to communicate with sensors allows for the batch transfer of threshold value changes from a remote location to improve productivity. SC-GU3-Compatible Sensors Digital...
Open the catalog to page 5Laser Sensors Amplifier Built-in • Ultra-compact Laser Sensor Built-in amplifier in this size? Ultra-compact Due to the customized IC and optical design, high precision detection is fulfilled in an ultra-compact size with directivity and visibility achievable only by laser. The laser adopted is Class 1 (IEC / JIS / FDA) laser that is safe to use, so that there is no need to separate the areas of sensor usage. General-purpose photoelectric sensor Easy beam-axis alignment Depth EX-L211/L212 Visually confirm the optimal receiver position, adjusting the beam axis by aligning the objects while...
Open the catalog to page 6Photoelectric Sensors Amplifier Built-in • Compact Photoelectric Sensor Sensors that are environmentally and user friendly. Reducing environmental burdens further Up to 60% less power consumption The total lineup of 148 models covers through the inclusion of a newly developed custom integrated circuit. The CX-400 series achieves reductions in power consumption of up to 60%, averaging 44% reduction when upgrading due to its unique design. These sensors reduce carbon emissions and contribute to environmental friendliness. Certified (Some models only) Less processing Providing stable detection...
Open the catalog to page 7Photoelectric Sensors Amplifier Built-in • Ultra-slim Photoelectric Sensor Smallest body: 3.5 mm thick Freely mountable fingertip size 3.5 mm 10 mm Freely mountable W10H14.5 D3.5 mm size (thru-beam, front sensing type). Moreover, easy alignment is possible with the visible red LED beam source. Six types of mounting brackets, fixable with M3 screws, are available. Conforming to EMC Directive (Excluding EX-15 /17 ) Electric power saving* The EX-10 series achieves reductions in power consumption of up to 65 %. These sensors contribute to environmental friendliness. Certified (Some models only)...
Open the catalog to page 8Photoelectric Sensors Amplifier Built-in • Ultra-compact Photoelectric Sensor Miniature-sized and still mountable with M3 screws Mountable with M3 screws in spite of miniature size 8.2 mm Long sensing range The EX-20 series achieves long distance sensing [thru-beam type: 2 m, retroreflective type: 200 mm (when using the attached reflector), diffuse reflective type: 160 mm], despite its miniature size. Hence, it is usable even on a wide conveyor. Clear beam spot using red LED dot light source The emission area of a dot light source is smaller than that of a conventional LED flat light...
Open the catalog to page 9Wire-saving Systems Flexible Wire-saving Link System S-LINK V RS-485 / RS-232C Gateway Controller Simple Communication link to Various PLC and Personal Computers! Two versions of serial communications are supported. Bit information of various sensors and switches is sent directly to the PLC. RS-232C Communications Communication protocols: for MEWTOCOL-COM / Modbus RTU Max. control points: Various sensors Supply voltage Interface Transmission speed Transmission form Transmission type / Half duplex / Full duplex / Synchronizing method Asynchronous communication method Asynchronous...
Open the catalog to page 10Light Curtains Light Curtain New version with improved environmental resistance performance! Protection structure IP67 is achieved Seamless structure and IP67 protection A seamless structure with least seam area possible is newly developed. The inner unit is protected by a cylindrical inner case. Seams such as unit and lens surfaces have been greatly reduced, so that particles such as oil mists and dust are prevented from getting in, rising its environmental resistance performance. Conforming to Machinery & EMC Directives Hand type Minimum sensing object Minimum sensing object Certified...
Open the catalog to page 11All Matsushita Electric Works catalogs and technical brochures
-
Narrow pitch RF connectors
12 Pages
-
High Current Connectors
12 Pages
-
Ultra-slim Photoelectric Sensor
16 Pages
-
Laser Distance Sensor
16 Pages
-
CA RELAYS
8 Pages
-
AQ-J RELAYS
19 Pages
-
AQ-H RELAYS
14 Pages
-
AQ-G RELAYS
14 Pages
-
AQ-A RELAYS (DC output type)
15 Pages
-
AQ-A RELAYS (AC output type)
17 Pages
-
AQ8 RELAYS
17 Pages
-
AQ1 RELAYS
16 Pages
-
HG-S series
18 Pages
-
HE
6 Pages
-
SFD-WL3
2 Pages
-
SF4D
42 Pages
-
ELC500
8 Pages
-
AC Fan Motor 80×38t
1 Pages
-
GT707
2 Pages
-
GT SERIES
24 Pages
-
GT32-R
2 Pages
-
Shin-G Series
293 Pages
-
MINAS-BL KV Series
52 Pages
-
LP-GS series
12 Pages
-
LP- V SERIES, LP- W SERIES
16 Pages
-
LP-M
12 Pages
-
ER-VW
8 Pages
-
ER-TF SERIES
6 Pages
-
ER-X001
4 Pages
-
EWA2
8 Pages
-
RJ RELAYS (ARJ)
5 Pages
-
SF Relays
4 Pages
-
mechDE Relays (ADE)
4 Pages
-
EX-L200
12 Pages
-
gtseries_e_cata
24 Pages
-
ce_up50_1
6 Pages
-
fx-100
20 Pages
-
uj30
12 Pages
-
Power relay selector chart
8 Pages
-
NEW & KEY PRODUCTS 2012
32 Pages
-
Aicure UJ30/35 Catalog
12 Pages
-
KW2G-H
4 Pages
-
LP-S series
12 Pages
-
LP-S500W
12 Pages
-
SC-GU3
8 Pages
-
SL-PK01
2 Pages
-
DPC-L100/DPH-L100
12 Pages
-
FP-X0
8 Pages
-
FPOR
20 Pages
-
PM 2
6 Pages
-
PM-24
6 Pages
-
LP-Z Series
4 Pages
-
LP-V/W Series
16 Pages
-
FP2SH
24 Pages
-
LP-300 Series
12 Pages
-
SF4B Ver.2
48 Pages
-
SL-VGU1-485
2 Pages
-
PM-44/PM-54
10 Pages
-
PV200
22 Pages
-
FX-500
20 Pages
-
Flat Type Fiber
2 Pages
-
LP-400 Series
16 Pages
-
MIPTEC catalog
8 Pages
-
PM-64
8 Pages
Archived catalogs
-
Lighting Control Catalog
42 Pages
-
Time Switches
2 Pages
-
Time & Synchronization VIC100
1 Pages
-
GPS Products Antennas
2 Pages
-
Phototriac Coupler
4 Pages
-
Signal Relays
31 Pages