AQ-H RELAYS
14Pages

Catalog excerpts

Automation Controls Catalog Panasonic Solid State Relays Compact DIP type SSR Ideal for AC load control FEATURES • Supports 0.3 A, 0.6 A, 0.9 A and 1.2 A ON-state RMS currents. • Handles both 100 and 200 Vrms loads. • High dielectric strength: 5,000 Vrms • Safety standards • C-UL (UL1577) certified • VDE (EN60950-1) reinforced insulation certified TYPICAL APPLICATIONS • Home appliances market: air conditioner, microwave oven, washing machine, personal hygiene system, refrigerator, fan heater, inductive heating cooker, rice cooker and humidifier, etc. • Industrial equipment market ORDERING INFORMATION (PART NO.) AQH ~ T T T T t—^ ON-state RMS current 1 Repetitive 0: 0.3 A peak OFF-state voltage Type 1 Number l Package Packing Nil: Tube X: Tape and reel packing X Z: Tape and reel packing Z Note: For space reasons, the SMD terminal shape indicator “A” and the package type indicator “X” and “Z” are omitted from the seal. *Tape and reel packing style X: picked from the 1/2/3/4-pin side, tape and reel packing style Z: picked from the 5/6/7/8-pin side.

Open the catalog to page 1

■ Absolute maximum ratings (Ambient temperature: 25°C)

Open the catalog to page 2

Solid State Relays AQ-H RELAYS I.ON-state RMS current vs. ambient temperature characteristics Allowable ambient temperature: -30 to +85°C 2.Peak ON-state voltage vs. ambient temperature characteristics LED current: 10 mA; ON current: Max. Measured portion: between terminals 6 and 8 1.6 3.Trigger LED current vs. ambient temperature characteristics Load voltage: 6 V DC; Load resistance: 100 0 4.LED dropout voltage vs. ambient temperature characteristics LED current: 10 to 50 mA 5.Turn on time vs. LED current characteristics Load voltage: 6 V DC; Load resistance: 100 0 Measured portion:...

Open the catalog to page 3

Solid State Relays AQ-H RELAYS Unit: mm CAD The CAD data of the products with a “CAD” mark can be downloaded from our Website. Through hole terminal type Surface-mount terminal type External dimensions External dimensions Recommended mounting pad (TOP VIEW) PC board pattern (BOTTOM VIEW) Terminal thickness: 0.25 General tolerance: ± 0.1 SCHEMATIC AND WIRING DIAGRAMS Output configuration Wiring diagram Power source at input side Power source at input side Load power supply Load power supply Power source at input side Load power supply Power source at input side Load power supply Please refer...

Open the catalog to page 4

Control voltage - -source T SAFETY WARNINGS • Do not use the product under conditions that exceed the range of its specifications. It may cause overheating, smoke, or fire. • Do not touch the recharging unit while the power is on. There is a danger of electrical shock. Be sure to turn off the power when performing mounting, maintenance, or repair operations on the relay (including connecting parts such as the terminal socket and socket). 1. Derating design Derating is a significant factor for reliable design and product life. Even if the conditions of use (temperature, current, voltage,...

Open the catalog to page 5

Load power supply 9. Ripple in the input power supply If ripple is present in the input power supply, observe the following: 1) Current-sensitive type (Phototriac Coupler, AQ-H) (1) For LED forward current at Emin, please maintain the value mentioned at “Recommended input current.” (2) Please make sure the LED forward current for Emax. is no higher than 50 mA. 2) Voltage-sensitive type (AQ-G, AQ1, AQ8, AQ-J, AQ-A) (1) The Emin. should exceed the minimum rated control voltage (2) The Emax. should not exceed the maximum rated control voltage 10. When the input terminals are connected with...

Open the catalog to page 6

Cautions for Use of Solid State Relays Cautions for Use of Solid State Relays 14. Soldering 1) When soldering surface-mount terminals, the following conditions are recommended. (1) IR (Infrared reflow) soldering method (Recommended condition reflow: Max. 2 times, measurement point: soldering lead) (2) Other soldering methods Other soldering methods (VPS, hot-air, hot plate, laser heating, pulse heater, etc.) affect the relay characteristics differently, please evaluate the device under the actual usage. (3) Soldering iron method Tip temperature: 350 to 400°C 662 to 752°F Wattage: 30 to 60 W...

Open the catalog to page 7

Cautions for Use of Solid State Relays 18. The following shows the packaging format 1) Tape and reel (Phototriac coupler) Type Tape dimensions (Unit: mm inch) Dimensions of paper tape reel (Unit: mm inch) 21±0.8 .827±.031 Tractor feed holes 1.55±0.05 dia. .061±.002 dia. Device mounted on tape 2.8±0.3 .110±.012 ±0.1 (1) When picked from 1/2-pin side: Part No. APT❍❍❍❍SX (Shown above) (2) When picked from 3/4-pin side: Part No. APT❍❍❍❍SZ Tractor feed holes 1.5 ±0.1 dia. −0 .059±.004 dia. −0 Device mounted on tape 12±0.1 .472±.004 (1) When picked from 1/2-pin side: Part No. APT❍❍❍❍AX (2) When...

Open the catalog to page 8

Cautions for Use of Solid State Relays 2) Tape and reel (AQ-H) Type Tape dimensions (Unit: mm inch) Dimensions of paper tape reel (Unit: mm inch) 21±0.8 .827±.031 80±1 dia. 3.150±.039 dia. Device mounted on tape 12±0.1 .472±.004 (1) When picked from 1/2/3/4-pin side: Part No. AQH❍❍❍❍AX (Shown above) (2) When picked from 5/6/8-pin side: Part No. AQH❍❍❍❍AZ 3) Tube Phototriac coupler and AQ-H SSR are packaged in a tube as pin No. 1 is on the stopper B side. Observe correct orientation when mounting them on PC boards. Snubber Circuit 1. Reduce dv/dt An SSR used with an inductive load can...

Open the catalog to page 9

Thermal Design SSRs used in high-reliability equipment require careful thermal design. In particular, junction temperature control has a significant effect on device function and life time. The rated load current for PC board-mounting SSRs is defined as the maximum current allowable at an ambient temperature of 40°C 104°F (30°C 86°F) and under natural cooling. If the ambient temperature exceeds the SSRs derating temperature point [40°C 104°F (30°C 86°F)], load current derating in accordance with the load current vs temperature diagram becomes necessary. If adjacent devices act as heat...

Open the catalog to page 10