Catalogs >
Matsushita Electric Works >
Aicure UJ30/35 Catalog

Aicure UJ30/35 Catalog
12Pages

Catalog excerpts

Panasonic LED UV systems are very compact, Have lower energy consumption than lamp systems And advanced features compared to other LED UV systems The AiCure is equipped with a temperature feedback controller originally developed by Panasonic. It’s UV irradiation meets the industry’s highets class of stability. Two new controller selections for you applications In addition to its user-friendlyness, energy efficiency and being environmentally friendly, these models have a high irradiation intensity power* of 8,000 mW/cm2 (wavelength :365 nm). Or 9,200 mW/cm2 ( walength: 385nm) and high...

Open the catalog to page 2

Open the catalog to page 3

Quick & Easy setup immediately after installation Strict quality control User-friendly interface Stable Irradiation Easy-to-read display and easy-to-setup panel Only three switches required for basic settings. Generally, when the LED temperature rises, the UV irradiation output decreases. To prevent the temperature to rise, the LED heads are built with metal materials with fins to increase heat dissipation. The LED heads are also equipped with a built-in temperature sensor to feedback the temperature to the controller. The controller will calculate the loss of power due to temperature...

Open the catalog to page 4

Open the catalog to page 5

Ideal for preventing thermal and curing distortion Reliable & Safe Environmentally Friendly and Reliable Frequent part replacement is reduced by LED technology. Long-lasting economic LED type UV system One of the biggest benefits of using the LED technology is that the light source life is much longer than lamps used in lamp type UV systems. The life of the lamp type is approx. 3,000 hours, but the LED has approx. 20,000 hours. Further more, unlike the lamp type, which needs to be kept turned on through out the operation, the LED can turn on instantly only when it is needed. When the...

Open the catalog to page 6

Open the catalog to page 7

Covering a wide variety of applications Heads & Lenses Heads A 365-nm wavelength type and a 385-nm type are available, with a head length of 50 mm or 120 mm. Directly connectable to the controller without a connection cable For higher irradiation power or shorter cycle time For curing deeper points of resin or curing resin through a film TVplcal characteristics Head lengths selectable location conditions When a standard lens is attached, the head is the shortest in its class (50 mm). Further, the radiation fins provide adequate cooling performance. The heat generating section has radiation...

Open the catalog to page 8

Intensity Profiles (Typical Examples) For details, please visit the following URL: http://panasonic-denko.co.jP/ac/e/fasys/uv/led/uj30-uj35/index.jsp Standard lens Side view lens Cylindrical lens Width direction Width direction

Open the catalog to page 9

Wide variety Product Lineup Application Guide [ Expansion cable for UV sensor Slim type UV sensor slim type UV sensor Heads & Cables Connection cables • For high intensity head Cable length 1.7 m 5.58 ft: ANUJ6220 Cable length 5 m 16.40 ft: ANUJ6250 Cable length 10 m 32.81 ft: ANUJ6200 Cable length 3 m 9.84 ft: ANUJ6230 Cable length 7 m 22.97 ft: ANUJ6270 High intensity heads (10,100 mW/cm2) 386 nm wavelength heads (12,800 mW/cm2) • Circular irradiation • Circular irradiation, Angled at 90° • Elliptical irradiation • Circular irradiation Small diameter lens Slim type UV sensor supplied with...

Open the catalog to page 10

Dimensions (Unit: mm) Excluding the protruding sections Metal head attachment Connection cable Standard/Cylindrical lens Rod lens ANUJ6467L Side view lens Lens Standard head High intensity head Different types of heads can be simultaneously connected to one controller unit. Safety precautions This LED type UV curing system uses a Class-3B ultraviolet LED. Make sure to read the safety labels. Contact input Input specifications UJ controller Foot switch Non-contact input Open collector (Tr) or non-voltage Input such as a relay Output specifications With external power supply With internal...

Open the catalog to page 11

Other related products Ideal for use with small-size equipment for positioning, detection of differences in levels, or detection of looseness Ultra-compact laser sensor with built-in amplifier The volume is down 67% from that of our general-purpose photoelectric sensor. The bright beam facilitates optical axis alignment. For example, EX-L211 can detect an object with a The M3 screw holes allow secure fixing. The IP67-rated protective structure is highly resistant Leading-edge detection performance ideal for higher-speed equipment and finer workpieces Digital Fiber Sensor Enables substantive...

Open the catalog to page 12