XR series

XR series

Product catalog summary
Specifications
  • Designed for grounded Cathode X-ray Tubes with compact high power ranging from 50W to 100W.
  • Features 0.05% emission current regulation and supports both remote and local emission control.
  • Includes adjustable filament current, safety interlock, and protection against overvoltage and short circuits.
  • CE certified for 50W and 75W models at 50kV.

This module is suitable for low power X-ray applications, offering adjustable beam, bias, and filament supplies. It ensures fast starts with linear ramp-up of high voltage and filament current, and allows precise emission control with adjustable constant emission current.

Input Voltage and Control
  • Input Voltage: 24V ±10%.
  • Local control via internal multi-turn trimmer; remote control via external voltage source (0 to 10V) with ±1% accuracy.
Emission Control and Regulation
  • Line and load regulation at ±0.01%.
  • Ripple: 0.2% peak-to-peak.
  • Stability: 0.05% over 8 hours for voltage and current.
  • Temperature Coefficient: 0.01% per °C.
  • Operating Temperature: 0°C to +50°C.
Monitor Output and Connectors
  • Voltage and current monitors output 0 to 10V with ±1% accuracy.
  • Connections via three Phoenix screw terminals and one 9-pin mini D-type connector.
Interlock and Protection
  • Interlock: Short to GND through a 12V lamp for HV/ON; OPEN for HV/OFF.
  • Protection includes overvoltage, overcurrent, arc, and short circuit safeguards.
Options and Dimensions
  • Optional LB Bias Supply: 0V to -300V adjustable, output current 0.25mA.
  • Dimensions: 9.5” × 3.3” × 5.5” (240 × 83.5 × 140 mm).
  • Shielded HV output cable available.
Applications and Features

Suitable for various X-ray power supply applications, with models available for 30kV, 50kV, and 65kV, ranging from 50W to 100W.

Contact Information

For further inquiries, contact Matsusada offices in San Jose, New York, Dallas, Chicago, or the headquarters in Japan.

See more

Catalog excerpts

XR series-1

aMc Matsusada Prcision X-ray Power Supplies XR Sries 30kV, 50kV, 65kV 50W to 100W 1016-07Pa ■ FEATURES 驕 For grounded Cathode X-ray Tubes. Compact High Power 50W to 100W. Օ 0.05% Emission current regulation. Remote and local emission control. Օ Adjustable filament current. Safety interlock. Օ Overvoltage and short circuit protection. CE certified for 50W and 75W of 50kV model. ■ APPLICATIONS This compact module incorporates adjustable beam, bias and filament supplies for low power X-ray applications. High voltage and filament current ramp up linearly for fast starts. Constant emission current is adjustable from 0 to full output for precise emission control. Output Voltage (kVdc) Output Current (mA) Model* Input Current (A max) Filament Supply 0 to +30 1.67 XR-305-50-## 4 0.3 to 3.5Adc,adjustable. Compliance Voltage 4.5V (9W max) 0 to +50 1 XR-505-50- ## 4 1.5 XR-505-75- ## 6 2 XR-505-100- ## 8 0 to +60 1 XR-605-60- ## 4.8 0 to +65 0.77 XR-655-50- ## 4 ■ SPECIFICATIONS OPTION LB Bias Supply 0V to -300V adjustable, output current 0.25mA LGH LGH-3I connector Please ask for CE marked models Input Voltage Voltage control 24V ±10% Local : via internal multi-turn trimmer Remote : via external voltage source 0 to 10V (Accuracy ±1%, Input impedance 10MQ) Local : via internal multi-turn trimmer Remote : via external voltage source 0 to 10V (Accuracy ±1%, Input impedance 10MQ) Line : ±0.01% Load : ±0.01% 0.2%p-p 0.05% / 8Hr for Voltage and Current 0.01% / °C 0°C to + 50°C Voltage monitor : 0 to 10V, ±1% accuracy, output impedance 1kQ Current monitor : 0 to 10V, ±1% accuracy, output impedance 1kQ Three Phoenix screw terminals and one 9pin mini D-type connector for INPUT, remote control, monitor output, filament and bias output. Short to GND through a 12V lamp : HV/ON OPEN : HV/OFF Over voltage, Over current protection. Arc, Short circuit Emission Control Add " -L " to the model number when ordering. (i.e.) XR-505-50-01-LBGH Regulation Ripple Stability Temperature Coef. Operating Temperature Monitor Output I/O connectors Interlock Protection Shielded HV output cable Pdart# CN-XR(1.5) 58.5"(1.5m)flying lea ( Whe n a co nnecto r of t h e s u i tab l e X- ray ) tube is required, please contact us. / ■ DIMENSIONS inch(mm) 9.5" x 3.3" x 5.5"(240 x 83.5 x 140) Note : These specifications are at the maximum rated output after a YzHr warm-up period unless otherwise specified. aMc Matsusada Prթcision Inc. For products) www.matsusada.com/product For contacta www.matsusada.com/contact San Jose Office : 2570 N.First Street Suite 200 San Jose, CA 95131 Dallas Office : 5430 LBJ Freeway, Suite 1200 Dallas, TX 75240 Headquarters : 745 Aoji-cho Kusatsu Shiga 525-0041 Japan Tel: +1-408-273-4573 Fax: +1-408-273-4673 Tel: +1-972-663-9336 Fax: +1-972-663-9337 Tel: +81-77-561-2111 Fax: +81-77-561-2112 New York Office : 80 Orville Drive Suite 100 Bohemia, NY 11716 Chicago Office : 2275 Half Day Road, Suite 350 Bannockburn, IL 60015 Tel: +1-631-244-1407 Fax: +1-631-244-1496 Tel: +1-847-821-2788 Fax: +1-847-821-2789

 Open the catalog to page 1

All Matsusada catalogs and technical brochures

  1. W series

    3  Pages

  2. RC series

    2  Pages

  3. TP series

    1  Page

  4. TZ series

    2  Pages

  5. TG series

    2  Pages

  6. TF series

    1  Page

  7. PZJ series

    2  Pages

  8. XWR series

    2  Pages

  9. X series

    1  Page

  10. Xg Series

    4  Pages

  11. AMP series

    4  Pages

  12. DRA series

    5  Pages

  13. DOS series

    8  Pages

  14. VOL Series

    12  Pages

  15. ECA series

    2  Pages

  16. KA-R series

    3  Pages

  17. EJC series

    2  Pages

  18. TA/TC Series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.