Catalog excerpts
Compact & High Power HV Power Supply Compact / High power W series 1kV to 40kV/ 120W, 200W, 300W, 350W > Compact · Light weight > Remote control · monitor > CC · CV automatic crossover > High efficiency > Full protection for output short circuit and arc > Wide output lineup APPLICATIONS * Electron Beam / Ion Beam * Electrophoresis / Bio * Automatic Test Equipment * X-ray Inspection System * Capacitor Charge SUMMARY The W series is a compact, high power module with AC input. It is best suited for CRT evaluation, x-ray systems, and capacitor charging applications. Equipped with full remote control capabilities and monitors, it features a wide range of outputs from 500V to 40kV / 120W to 350W. LINEUP Output Voltage (kVdc) 300W to 350W Output Current Model (mA) *P for Positive, N for Negative Polarity P SPECIFICATIONS Input Voltage Output Control External control voltage 0 to 10V or external 5k potentiometer Protection against overvoltage, over current, short circuit, arc and over temperature Voltage Regulation Line : ±0.02%(of max voltage for Input ±10% change) Load : 0.02%(of max voltage for full load change) Temperature range Operating : 0 to + 50°C Storage : -40 to + 85°C Current Regulation Line : ±0.1%(of max current for Input ±10% change) Load : 0.2%(of max current for full load change) 0.02%/Hr, 0.05%/8Hr(at voltage operation) 0.05%/Hr, 0.1%/8Hr(at current operation) HV shielded output cable(flying lead) 2.5m(1) AC input cable 2.5m(1) Fixing screws control connector D-sub 25pin. Other function • Voltage, Current Program(0 to 10V, 0 to 5k) • Voltage, Current Monitor(0 to 10V) • HV ON/OFF • Interlock • HV status • 10.24V reference Temperature coef. 200ppm/°C(at voltage operation) 500ppm/°C(at current operation) Monitor Remote switch ON/OFF *These specifications are at the maximum rated output after a warm-up period unless otherwise specified. The external appearance and specifications of all products shown in this catalog are subject to change without notice.
Open the catalog to page 1#6-32 BLIND INSERTS Depth 0.23(5.8) CONTROL CONNECTOR OPTIONS -L(100V) Input Voltage AC 100V±10% -L(200V) Input Voltage AC 200V±10% -L(230V) Input Voltage AC 230V±10% *When ordering, please suffix L Mark(option mark) to the model number. {e.g.}W1-0.5P-L(230V) #6-32 Threaded Inserts Depth 0.23(5.8) 2.19 CONTROL CONNECTOR #6-32 Threaded Inserts Depth 0.23(5.8)
Open the catalog to page 2USA/canada : 1-888-652-8651 other countries : 1-81-77-561-2112 Customer Inquiry Sheet (HV modules) Please copy this page and above fax number after filling out form below. I would like A quotation Give us your requirement / comment Please fill in below. Address: Warranty We warrant that products contained in this catalog (hereinafter, the “Products”) are free from defects in material and workmanship under normal use for a period of one (1) year from the date of shipment thereof. However, the warranty period for X-ray detectors and X-ray source shall be either one (1) year from the date of...
Open the catalog to page 3All Matsusada catalogs and technical brochures
-
RC series
2 Pages
-
TP series
1 Pages
-
TZ series
2 Pages
-
TG series
2 Pages
-
TF series
1 Pages
-
PZJ series
2 Pages
-
XWR series
2 Pages
-
X series
1 Pages
-
XR series
1 Pages
-
Xg Series
4 Pages
-
AMP series
4 Pages
-
DRA series
5 Pages
-
DOS series
8 Pages
-
VOL Series
12 Pages
-
ECA series
2 Pages
-
KA-R series
3 Pages
-
EJC series
2 Pages
-
TA/TC Series
2 Pages