TZ series
2Pages

Miniature on-board Ultra compact HV Power Supply 01.178.01 34-1 The smallest ultra compact on-board module Low ripple, 30mVp-p Input voltage is selectable from 5V and 12V. Voltage monitor is equipped as normal feature Low power consumption design SUMMARY TZ series is just 0.98 x 0.79 inches (25 x 20mm) compact PCB mountable power supply with up to 500V output. Its very low ripple, 30mVp-p will maximize performance of APD, SiPMT, and GM tube. It is suitable for mobile measurement application because of its low power consumption design. * Specify input voltage, "5" for 5Vdc, "12" for 12Vdc. Positive polar output TZ-0.2P- Ripple (mVp-p) Negative polar output TZ-0.2N- Rated output current is not to be drawn at low output voltage range. See output range below. NOTE For extra safety ground 2 terminal when operation. CONNECTION DIAGRAM SPECIFICATIONS Input voltage/current Output control Regulation Stability Temperature coefficient Setting voltage accuracy Reference voltage Voltage monitor -5 : +5Vdc ±5% 50mA typ. -12 : +12Vdc ±1Vdc 30mA typ. By external potentiometer 10k or external control voltage(Vcon-in) 0 to 2.5Vdc Line : ±0.005% -5 : for ±5% input voltage change -12 : for ±1V input voltage change Load : 0.01% (for 10% to 100% load change) 0.02%/Hr 25ppm/°C typ. ±0.5%(at maximum output Vcon-in) 2.5V±1% 0 to 2.5Vdc (output impedance: 1k) By contact signal(Open: OFF, Short: ON) Intermittent output short circuit Remote ON/OFF Protection Operating temperature -10°C to +65°C Storage temperature -25°C to +85°C Weight 20g(approx.) Remote short:ON ON/OFF open:OFF ON/OFF Vmoni 1.Pin 2 , 8 and case are internally connected. (Pin 8 is not available with -LX option) 2.Use potentiometer of low Temp. Coefficient or metal film resistor for external VR. CW Remote short:ON ON/OFF open:OFF 1.Pin 2 and case are internally connected. 2.Use potentiometer of low Temp. Coefficient or metal film resistor for external VR.

DIMENSIONS inch (mm) [ Standard model ] SIDE VIEW SIDE VIEW Warranty We warrant that products contained in this catalog (hereinafter, the “Products”) are free from defects in material and workmanship under normal use for a period of one (1) year from the date of shipment thereof. However, the warranty period for X-ray detectors and X-ray source shall be either one (1) year from the date of shipment or 1,000 hours, whichever shorter.The above warranty shall not apply to any Product which, at our sole judgment, has been:i)Repaired or altered by persons unauthorized by us; or ii)Connected,...